Tt Andy Posted August 22, 2019 Report Posted August 22, 2019 Jirapon Glinchoo, นาย มะสัง and ภณณิทัศน์ โสภณธาดา 1 2 Quote
Juggapat Posted September 11, 2019 Report Posted September 11, 2019 Hello everyone!! I'm juggapat Thonglue from Thailand. I am very honored and excited to participate in this competition. Thanks to Andy and Thermaltake for organizing this competition. You can follow me on this page : https://www.facebook.com/Juggapat-Modifier-JMDF-191604944726528/?ref=bookmarks Thank you AMD, Zotac, ASRock & Plextor for sponsoring us with all the components for the project. This project is a project used in the 2019 Thermaltake CaseMOD Invitational Season 2 contest. I designed to be like the head of a robot Which the case used in the contest was the Core P5 TG V2 Black Edition. I was looking for inspiration from the internet in designing, which is to combine many designs that I like together. And I brought the hardware to install on both sides of the case to make it look around the work and almost 80 percent were made from 3D printers. I chose to use red as the primary color to make this project stand out. I hope you like it. AlexTt and XneaLx ModPc Gaming 2 Quote
Juggapat Posted September 12, 2019 Report Posted September 12, 2019 Awesome gaming gear and Powersupply!! Thank Thermaltake and Andy !! .. AlexTt and XneaLx ModPc Gaming 2 Quote
Oranit McRae Posted September 15, 2019 Report Posted September 15, 2019 On 9/11/2019 at 5:55 AM, Juggapat said: Hello everyone!! I'm juggapat Thonglue from Thailand. I am very honored and excited to participate in this competition. Thanks to Andy and Thermaltake for organizing this competition. You can follow me on this page : https://www.facebook.com/Juggapat-Modifier-JMDF-191604944726528/?ref=bookmarks Thank you AMD, Zotac, ASRock & Plextor for sponsoring us with all the components for the project. Quote
Juggapat Posted September 19, 2019 Report Posted September 19, 2019 XneaLx ModPc Gaming and AlexTt 2 Quote
Jos214demi Posted September 19, 2019 Report Posted September 19, 2019 ooohhhh I saw RED!!! This is gonna be a #### build! Quote
Juggapat Posted September 19, 2019 Report Posted September 19, 2019 Hahah !! Of course, I like the red color. 😂😂 Quote
AlexTt Posted September 26, 2019 Report Posted September 26, 2019 On 9/19/2019 at 1:53 PM, Juggapat said: Hahah !! Of course, I like the red color. 😂😂 The color seems to be red, but two or four wheels? Quote
Juggapat Posted September 26, 2019 Report Posted September 26, 2019 2 hours ago, AlexTt said: The color seems to be red, but two or four wheels? This project has no wheels. Hahah!! AlexTt and chanyut EXPC Th 2 Quote
AlexTt Posted September 27, 2019 Report Posted September 27, 2019 21 hours ago, Juggapat said: This project has no wheels. Hahah!! Any clue? Quote
Juggapat Posted September 27, 2019 Report Posted September 27, 2019 3 hours ago, AlexTt said: Any clue? Right now I'm thinking about 2-3 kinds,Hahah , but I will do my best. AlexTt and chanyut EXPC Th 2 Quote
Juggapat Posted October 16, 2019 Report Posted October 16, 2019 Update !!! -Riing Trio 12 RGB Radiator Fan TT Premium Edition (3-Fan Pack) -WaterRam RGB Liquid Cooling Memory DDR4 3200MHz 32GB (8GB x 4) Quote
Juggapat Posted October 26, 2019 Report Posted October 26, 2019 UPDATE!! 26/10/2019 I have already written in 3D and then exported to a program for 3D printing. Quote
Juggapat Posted November 6, 2019 Report Posted November 6, 2019 Update !! Drill the case with a drill To attach the workpiece to the case After 3D printing, put it on the skin. Quote
Juggapat Posted November 7, 2019 Report Posted November 7, 2019 Update!! Distroplate Pacific Core P5 DP-D5 Plus Thank you Andy Cheng Quote
Juggapat Posted November 19, 2019 Report Posted November 19, 2019 Update!! - After inserting the work surface Bring to scrub the skin smooth. - Spray paint to check uneven work surface (If found that the work surface is uneven Will bring back to Putty on a skin) Quote
Juggapat Posted November 28, 2019 Report Posted November 28, 2019 Update !!! -Take the parts that have been finished painting Assembled with the case Quote
Juggapat Posted December 6, 2019 Report Posted December 6, 2019 Update!! -Cutting and drilling the case for fixing various hardware. Quote
Juggapat Posted December 7, 2019 Report Posted December 7, 2019 Update!! - Install the water cooling system. Quote
Erik Bmods Posted December 14, 2019 Report Posted December 14, 2019 So looking forward to this man. Cant wait! Quote
Juggapat Posted December 14, 2019 Report Posted December 14, 2019 3 hours ago, Erik Bmods said: So looking forward to this man. Cant wait! Thank you bro. ,Now is accelerating greatly. Haha Erik Bmods 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.