Wingfat Posted February 28, 2015 Report Posted February 28, 2015 Please don't laugh at my question but I need to know which two ports on the radiator to use. If held with the "Thermatake" logo in the normal horizontal position, then the single hole on the left is towards the bottom of the unit. I'm going to assume I use the two ports on the right bottom? Also which is input and which is output? There is no documentation on this subject. Thanks in advance. Quote
CyberDustin777 Posted February 28, 2015 Report Posted February 28, 2015 Radiators don't have specific in and out ports. Hook it up however you want. ThermalMike 1 Quote
TT CPM Posted March 5, 2015 Report Posted March 5, 2015 Hi Wingfat This picture for your reference. You can also check our webpage. http://www.thermaltake.com/Liquid_Cooler/Liquid_Cooler_/Radiators/C_00002553/Pacific_RL240_Radiator/design.htm ThermalMike 1 Quote
Wingfat Posted March 6, 2015 Author Report Posted March 6, 2015 Studying your graphic I find my setup is reversed. Using the single port on the far end for reference, my input and outputs are reversed. In order to achieve the pictured flowI would have to turn the rad upside down ( so the logo would be upside down) and swap the connections. Does it really make a difference? Quote
Tt Andy Posted March 6, 2015 Report Posted March 6, 2015 Hello Wingfat, apart from aesthetics it wont make any difference Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.