Tt Andy Posted November 9, 2017 Report Share Posted November 9, 2017 Quote Link to comment Share on other sites More sharing options...
Jos214demi Posted November 21, 2017 Report Share Posted November 21, 2017 And here we go!! Good luck mate! Quote Link to comment Share on other sites More sharing options...
LiquidAtoR Posted December 16, 2017 Report Share Posted December 16, 2017 Go Peter! Quote Link to comment Share on other sites More sharing options...
L3p Posted January 18, 2018 Report Share Posted January 18, 2018 Hi everyone! So here we go on another one I have to admit it took me a while to come up with some ideas but I'll give it a try Lets first unpack some awesomeness! Ramon Swart 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted January 28, 2018 Report Share Posted January 28, 2018 And here we go again. More parts arrived. After a lot of brainstorming my whole idea changed for this case. Going for something more compact then the original with just parts from the original. A lot of measuring. And some changes needed First drilling and sawing can start Behold ... 13 million splinters Quote Link to comment Share on other sites More sharing options...
Jos214demi Posted February 2, 2018 Report Share Posted February 2, 2018 The awesomeness of the splinter post is the best one! L3p 1 Quote Link to comment Share on other sites More sharing options...
Ajames Posted February 2, 2018 Report Share Posted February 2, 2018 Peter Brands for the win! L3p 1 Quote Link to comment Share on other sites More sharing options...
daryl040287 Posted February 3, 2018 Report Share Posted February 3, 2018 Come on...!! You can do it...!!! L3p 1 Quote Link to comment Share on other sites More sharing options...
TechnoStuck Posted February 3, 2018 Report Share Posted February 3, 2018 From one Peter to another, go for it L3p 1 Quote Link to comment Share on other sites More sharing options...
Ajames Posted February 4, 2018 Report Share Posted February 4, 2018 cant wait to see overall build L3p 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted February 4, 2018 Report Share Posted February 4, 2018 Thanks all! Here we go again filing and sanding all sharp cuts And painting them again in same color Time to figure out the rest And figuring out the loop Mounting the GPU to the case Quote Link to comment Share on other sites More sharing options...
Jos214demi Posted February 5, 2018 Report Share Posted February 5, 2018 hmmm the loop will go around the GPU L3p 1 Quote Link to comment Share on other sites More sharing options...
syoNi546 Posted February 5, 2018 Report Share Posted February 5, 2018 the loop that can loop the loop, so much tubing in there L3p 1 Quote Link to comment Share on other sites More sharing options...
Sarge Posted February 5, 2018 Report Share Posted February 5, 2018 Mmmmm so much tasty hardware And so many fittings! Can't wait to see what you've come up with Peter ! L3p 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted February 10, 2018 Report Share Posted February 10, 2018 Also the pumps arrived! So much measuring, improvising and measuring again. And back to piping. Pressure testing What liquid should I use? Clear? White? punypowr 1 Quote Link to comment Share on other sites More sharing options...
Phishies Posted February 12, 2018 Report Share Posted February 12, 2018 Looking good Peter. I'm rather enjoying your build over the others and here is why. You are actually modifying the stock case into a different configuration instead of creating some weird awful monster case that in no way resembles the original P90. Looking forward to seeing the end result. (btw white liquid imo) L3p 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted February 12, 2018 Report Share Posted February 12, 2018 Thanks, really appreciated I have to say, with contests my goal never is to win anything but just create something I would want on (or as) a desk. I'm actually quite a slow modder because of family and work go first and that I always need things in my hands before I can do anything, Also because of the contest rules like updating every week AND have it finished by the 22nd of February (incl final photoshoot) I completely changed my original idea. First idea was to make a benchtable. So with the limited time for the build and buildlog I went for something any one could actually make without adding extra weird / custom fabricated parts. Just a drill, grinder and jigsaw. And fun thing is .. even I don't know what the result will be in 9 days. Just go with the flow! So .. still figuring out how to hide all the cables with this open design Also decided to re-use the original glas panels, however I will shorten the steel poles from 190mm to 95mm so the glas panels will have a 2mm spacing. Inception! As time is limited and I didn't want to do it by handsaw used the grinder at work. Love sparks! Quote Link to comment Share on other sites More sharing options...
r3volt97 Posted February 13, 2018 Report Share Posted February 13, 2018 Best of luck L3p 1 Quote Link to comment Share on other sites More sharing options...
spidey316 Posted February 16, 2018 Report Share Posted February 16, 2018 Good luck Bro may the Force Be With You L3p 1 Quote Link to comment Share on other sites More sharing options...
EmranRyzen Posted February 17, 2018 Report Share Posted February 17, 2018 Good Luck L3p 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted February 18, 2018 Report Share Posted February 18, 2018 Almost there! Some extra protection for the glass panels. Like a charm Still had the panel scews from a previous project and wanted the same look on the top as the front. Had to re-drill and tap the mounts to M5 At first I had the idea to mount all cables and controllers on the back outside. Even though we're at a deadline I decided to change it completely and hide all cables inside too. And while I'm at it .. sleeve the pump cables too. So had to dismount everything to be able to change the fans and their wiring. And it's back inside. Now to hide all this. All fans and RGB connectors hidden, Now just the power cables. Decided to create some more construction/stability on the bottom of the case in case it ever needs to be shipped. And more cable-hiding possibilities. Seriously hate these splinters And there we go, exactly as I wanted it. Time to fill it up! Quote Link to comment Share on other sites More sharing options...
alan1476 Posted February 18, 2018 Report Share Posted February 18, 2018 Good luck my friend. L3p 1 Quote Link to comment Share on other sites More sharing options...
L3p Posted February 18, 2018 Report Share Posted February 18, 2018 Thanks, I will need it haha! Quote Link to comment Share on other sites More sharing options...
L3p Posted February 19, 2018 Report Share Posted February 19, 2018 Three days to go, such a tight schedule, always exciting to see if the hardware survived through the 'process' So happy to see the bios at first boot Now to install OS and turn off rainbow effects. And then ... hopefully final pics! Quote Link to comment Share on other sites More sharing options...
L3p Posted February 20, 2018 Report Share Posted February 20, 2018 So .. Just filling this post to go to next page to save some people from loading times Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.