riceOtaku Posted December 18, 2019 Report Share Posted December 18, 2019 Hi all, I have the following set up: Software: TT RGB Plus V 1.3.2, F 3.0.1 Controller 1: (dip switch position 0000) Slot 1: 200mm Riing plus case fan Slot 2: 200mm Riing plus case fan Slot 3: 140mm Riing plus case fan Slot 4: 120mm Riing Trio rad fan Slot 5: 120mm Riing Trio rad fan Controller 2: (dip switch position 1000) Slot 1: 140mm Riing Trio rad fan Slot 2: 140mm Riing Trio rad fan Slot 3: 140mm Riing Trio rad fan Whenever I change a setting in one controller, it overwrites the other controller's slot with the same ID. Example: I set Controller 1 Slot 1 to wave. Click save. Controller 1 Slot 1 is wave, but so is Controller 2 Slot 1. So I go to Controller 2 Slot 1 to change it to static, and click save. Now Controller 2 Slot 1 is static, but so is Controller 1 Slot 1. It will do this for any slot 1-3. Obviously it doesn't do it for 4 or 5 because there is only a slot 4 and 5 on controller 1. There seems to be no way for me to have seperate settings for the 2 slots, but why else would I be able to have 2 controllers if there can only be 5 settings at a time? They're even different models of fans (and selected as such in the dropdown). All of them also have unique names. I have them both connected to the same USB header Y-cable that came packaged with the riing trio 3 pack. I have already: Uninstalled and re-installed the software. Did this before installing a new set of Riing Trio 140s. I also wiped the settings folder in AppRoaming. How do I fix this? Has this been seen before? Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.