Search the Community

Merging vendors feature in QuickBooks permits the user to consolidate all the transactions and update information as needed. This will save a lot of time and efforts as the user can see all the transactions at one place. In today’s post, we will be learning the process to merge vendors in QuickBooks. So, make sure that you read this blog carefully till the end. Or you can also get in touch with our support via our toll-free number and ask them to carry out the merging vendors in QuickBooks desktop process on your behalf, as experimenting might cost you a bit. Give us a call whenever you need us, we will be happy to help you. Things to remember · Before merging vendors, create a backup of the company file · Also, save the file names as single user mode · No incomplete accountant changes should be present · Do not use an accountant’s copy file · Also turn off the multi-currency Steps to merge vendors in QuickBooks 2019 and later versions Follow these steps in order to merge the vendors in QuickBooks desktop 2019: The user can merge vendors in QuickBooks, by carrying out the steps below: · The user needs to first access merge vendors window o This can be done by visiting the accountant menu and selecting client date review and then move to the merge vendors (for QuickBooks desktop accountant users) o For QuickBooks desktop enterprise users, the steps are to visit the company menu and then choose the accounting tools, followed by visiting the merge vendors · After that select the vendors to be merged and then click on next · Followed by selecting a master vendor and then click on merge · The next step is to click on yes to confirm · And then click on Ok on the merge complete window Steps to merge vendors in QuickBooks Desktop 2018 and below · First of all, you need to choose Vendors menu · After that select the Vendor Center · Make a note or copy the name of the vendor that you would like to keep. · After that hit a right-click on the name of the vendor that you would like to merge, then choose the Edit Vendor option. · Now replace the vendor name with the one you took note of or copied, · Now choose OK button. · Finally choose Yes button to proceed with the mergeonce the prompt will appear We end this over here, with the hope that the steps scribbled above might help you in merging vendors in QuickBooks desktop. Moreover, you can also contact our QuickBooks support team for further assistance, and ask them to perform the steps on your behalf. Call us anytime at 1-844-405-0907, and we will be happy to help you.

2018 Thermaltake CaseMOD Invitational Voting Has Started! Vote for your favorite mod on the poll for your chance to WIN a Floe Riing RGB 240 AIO Cooler, Level 20 GT chassis or a Toughpower DPS G RGB 750W PSU! VOTE DATE: 9/18/2018 ~ 9/24/2018 Please note that all winners from previous giveaways will be announced together along with this giveaway! Below are the mods: Malaysia A hmad Syafiq Hamman Spain Aitor Larrañaga USA Calen Saddler Philippines Michael John Lacerna Germany Monia Reuter France Moulard Mathias India Pramod Hambir Thailand Pakawat Chaiboonma UK Rob De Luce Netherlands Tim Warning China Van Lee

The Top 6 modders of TT Telent has been announced! Congratulations to the top 6 modders Whats involved in the next stage? Modders need to submit a video introducing/promoting TT RGB PLUS ecosystem with Riing Trio fans by 2018/11/22, 11:59 PST.

Thanks for checking out my build log, I have been lucky enough to have been pick (1 of 5) to be apart of the Thermaltake UK Modding Trophy 2018, It’s been 2 years since the last one, I am very honored to have been chosen. I just want to say a massive thank you to all the sponsors, Thermaltake, Asus, AMD, Adata, Bit-tech and Scan for their support in this competition. The name of my project is #TT20. I have attached some drawing below that I submitted for the project, It will have a very clean look to the build. I always like to try new techniques or do something that I have not done in a build before and this build will be no different. I will be keeping the front and the top of the case stock. The back, side and the internal of the case will all be modded, Back and Side Front and side, The Hardware, 1 x Thermaltake Level 20 XT chassis 1 x Thermaltake M360 Plus water-cooling kit I 1 x Thermaltake 850W Toughpower ‘SYNC’ Edition PSU 1 x Asus ROG Strix X470 - F Gaming motherboard. 1 x Asus Dual RTX 2080 OC 8GB 1 x AMD Ryzen 7 2700X CPU 1 x Adata SX6000 256GB M.2 SSD 1 x Adata XPG Gaming D10 2,400MHz 16GB (2 x 8GB) DDR4 2x Riing Plus 20 fans RGB 6x Riing Plus 12 Fans RGB TT Premium PCI-E 3.0 Extender I Thermaltake also gave us, Thermaltake Dasher Gaming Mouse mat, Thermaltake X1 RGB, think I am going to mod this. TT esports Nemesis mouse RGB I do have more stuff coming once I have them I will update the build log. Feel free to comment below. Thanks Richard.

Hello, so somehow this novice of a modder has been chosen to be one of the five competitors in this years Thermaltake Modding Trophy! Words cannot describe how much this means to me nor could I tell you the challenge ahead this brings to me as newcomer on the modding scene, I sure feel like I have a lot to prove! My design of course got me in to the competition and that is what I call '20th Century TT' so let me tell you where the idea came from although it's pretty obvious to most. As soon as I heard the competition was Thermaltake's 20th anniversary the 20th Century Fox movie studios came right to me, I thought it was a good idea and what do you know, apparently it is and I can finally show you all the design that got me here. I'm proud to be in this position and to show you all what I can do! The Main Hardware 1 x Thermaltake Level 20 XT chassis 1 x Thermaltake M360 Plus water-cooling kit 1 x Thermaltake 850W Toughpower ‘SYNC’ Edition PSU 1 x Asus Socket AM4 Motherboard (model TBC) 1 x Asus Nvidia-based graphics card (model TBC) 1 x AMD Ryzen 7 2700X CPU 1 x Adata SX600 128GB M.2 SSD 1 x Adata M.2 RGB heatsink 1 x Adata Spectrix D41 3,000MHz 16GB (2 x 8GB) DDR4 At the moment I'm still gathering a few items that I will need and soon discovered that some of the items I originally planned are no longer available so will have to search elsewhere, which isn't as easy as it sounds but not to worry. I'll update again once I have more on the way so this post may be quiet for a week or so, I just wanted to get my head in the door and say hello. First package for the build, we got this on the 28th of September for the opening ceremony at Scan HQ and what an awesome day that was all round! Second delivery was two packages, we got them last week and oh my where am I suppose to put all of this? And what a beautiful case it is! Sorry for stock photo I got excited and couldn't keep it in one piece long enough for a photo. Here's a little progress I've made over the past day, I've taken every piece of metal that isn't riveted away from the chassis and plan to paint it antique gold to help keep in with the theme, I've of course added some glitter to the two large front plastic columns, I couldn't help myself with that! I somewhat feel like it is a part of me now, I've used it on all my builds but none was as over the top as the first but that was for my daughter so was to be expected, anyhow I certainly feel it got my name out there, so less about me and more about the build in question. Not only did I paint all the metal removable but also the dust filters! Albeit a couple of them are on the bottom of the case and won't be seen but I didn't see no reason not to do them, it'll please me at the very least. I''ll have to re-do the motherboard tray as too much spraying has really buggered my wrist, from an old injury so that'll be on hold for the next few days at least, in the meantime I do plan on finding somewhere somewhat local that can supply me some acrylics, it's harder than you think to find antique gold vinyl! I'll also update with some more of the pictures from the work on the filters and such when I get around to finishing the motherboard tray so stay tuned and thanks for looking! Some more stuff came for the build and I managed to finish the motherboard tray this time around but I also had to do the redo the front columns due to an issue with the glitter I was using. Thermaltake M360 water cooling kit & Pacific W4 Plus CPU water block. Thermaltake Pacific PR22-D5 Pump & res combo. Some Thermaltake tubing, liquid, fittings and pipe bending kit, despite this will be my first time water cooling I think I have everything I need. Thermaltake ToughPower Grand RGB 850 Thermaltake Pacific Rad Plus LED Panel & Lumi Plus Oh the glorious Thermaltake Riing Plus fans! Oh what is this... It only the Thermaltake Pacific V-RTX Plus! Last and not least the motherboard tray fitted in the chassis, looking very gold at this moment indeed and there is more to come... I may need to think about how I go about this as it's very reflective. No update just yet but we do have some shots of the beautiful Thermaltake Pacific V-RTX Plus GPU block! Sadly I had to change the colour scheme slightly due to not being able to source any more antique gold acrylic, so now it's just gold! I've also done a little progress too, tomorrow I should get around to putting the block on the GPU! (Should be fun). Anyways hope you like what you see because there's even more incoming, for some it may be a little too much but right now I think it's going to look better than I expected! I got the GPU block on, no issues other than my heart rate was double of what it should of been during the process. Some of you may of noticed the little detailing I've done on the GPU backplate, I'm glad I didn't do more than that, I think it's a nice subtle touch, anything more would of been over the top... If it's not already. Forgot to add an image of the side panel that will be used for the left side of the case and starts to set off the theme I have for this build.

Good afternoon everyone! I am proud to have been selected as one of the 5 competitors in the UK Trophy. Honestly humbled and look forward to watching my own and everyone else's builds evolve. What is ''SteamPunk 20'' This is one of my bonkers ideas that take over my brain at 11pm at night. I don't want to give away too much, but i will say this. Good old fashioned original steampunk, with electric motors and ofc some steam :p (Oil based don't panic) Copper pipes, lots of antique brass,leather and over 200 solid steel bolts! Let's not even start with the glass, acrylics and custom made metal badges and logos. I also may attend events wearing a top hat and with a scary looking steampunk cane. (For effect ya'll) System Specs 1 x Thermaltake Level 20 XT chassis 1 x Thermaltake M360 Plus water-cooling kit 1 x Thermaltake 850W Toughpower ‘SYNC’ Edition PSU 1 x Asus Socket AM4 X470-F gaming 1 x Asus Duel RTX 2080 1 x AMD Ryzen 7 2700X CPU 1 x Adata SX6000 256GB M.2 SSD 1 x Adata M.2 RGB heatsink 1 x Adata Gammix D10 2,400MHz 16GB (2 x 8GB) DDR4 My design entry for now, i welcome you all to come on in and offer feedback criticism and points of view. Don't worry i won't chew your head off, i'm friendly, honest :p I know it's early days, but getting this up is a weight off my shoulders for the coming days. Thanks for looking. Craig.

Chennai Super Kings Team 2018 IPL Chennai Super Kings are back for the 2018 Indian Premier League (IPL) after the 2-year suspension. With its entry it has already signed some top Indian Cricket stars and are looking to win the IPL title. The team was founded in the year 2008 and the team’s home ground is M.A. Chidambaram Stadium in Chennai. They have won the IPL title for two times (2010 and 2011) and have maintained the best win percentage among the other teams taking part in this league. The approximate brand value of Chennai Super Kings team was estimated at $67 million as per 2015 statistics. The team has played 8 seasons out of 10 till date, being suspended for 2 years from the IPL for the alleged involvement of their team owner’s in the 2013 IPL spot-fixing and betting case. With Mahendra Singh Dhoni as their captain for the 2018 season, the Chennai Super Kings team 2018 is listed below:

On the boxes I saw printed at the buttom: @2018 for the GF1 and @2020 for the GF, does that mean GF is the newer/better product?

Hi, I noticed that after updating from version 2.0.9 to 2.1.1 I get a constant 12ish percent cpu usage. Is this a known issue? Is there a solution? Host Name: APPA OS Name: Microsoft Windows 11 Pro OS Version: 10.0.22621 N/A Build 22621 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Multiprocessor Free Registered Owner: admin Registered Organization: Product ID: 00330-80000-00000-AA030 Original Install Date: 10/8/2022, 20:05:12 System Boot Time: 2/26/2023, 00:13:12 System Manufacturer: Gigabyte Technology Co., Ltd. System Model: Default string System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 79 Stepping 1 GenuineIntel ~3401 Mhz BIOS Version: American Megatrends Inc. F7c, 6/15/2018 Windows Directory: C:\WINDOWS System Directory: C:\WINDOWS\system32 Boot Device: \Device\HarddiskVolume2 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 32,602 MB Available Physical Memory: 21,430 MB Virtual Memory: Max Size: 37,466 MB Virtual Memory: Available: 22,562 MB Virtual Memory: In Use: 14,904 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\APPA Hotfix(s): 4 Hotfix(s) Installed. [01]: KB5022497 [02]: KB5012170 [03]: KB5022845 [04]: KB5022610 Network Card(s): 4 NIC(s) Installed. [01]: Killer E2400 Gigabit Ethernet Controller Connection Name: Ethernet Status: Media disconnected [02]: Intel(R) Ethernet Connection (2) I218-V Connection Name: Ethernet 2 DHCP Enabled: Yes DHCP Server: 192.168.1.1 IP address(es) [01]: 192.168.1.150 [02]: fe80::fb1a:87a:3c54:aca3 [03]: 2600:4040:5ed0:af00:51de:f5a6:c5b:306e [04]: 2600:4040:5ed0:af00:333b:2c69:a5a5:d1aa [03]: Intel(R) Dual Band Wireless-AC 8260 Connection Name: Wi-Fi Status: Media disconnected [04]: Bluetooth Device (Personal Area Network) Connection Name: Bluetooth Network Connection Status: Media disconnected Hyper-V Requirements: A hypervisor has been detected. Features required for Hyper-V will not be displayed.

I've recently finished my build but there's still one problem: the fans aren't recognized correctly. When I start the PC only one LED on the fans lights up. I use Asus Aura Sync and iCue (with a plugin) to control the lights. My current workaround is closing the iCue App once it started and then opening Aura Sync. This turns on the rest of the lights on the fans but to get them recognized separately I have to reenter the amount of LEDs. The Fans appear as one addressable header in the software btw. Does anyone know how to fix this? Specs: Thermaltake View 51 TG Snow ARGB + 3 preinstalled fans Corsair Vengeance White (2x 8GB) Asus Prime X570 - Pro 1TB SSD Corsair RMx White (2018) 750 W 80+ Gold AMD Ryzen 5 3600 + Fan that came with it (temporary fan) AMD Radeon HD 5450 1GB (temporary as well)

I am experiencing no lights on the pump head as well. Set up has not changed since it was built. Nothing added to the machine. Unfortunately, I bought the Floe Triple Riing RGB 360 TT Premium Edition CL-W158-PL12SW-A back in December of 2018. Is there a a fix to this or is it time to buy a new AIO?

nah i dont get the software work so nope the support said they can replace my current keyboard but that will brings me nothing they need to update the software the v1.0 is from 2018 i donwloaded the software again a moment ago and watched in the device managment where u can find drivers and i cant find any one with the name ttesports or a path what has something to do with the keyboard so its seems like there is rn no driver there they need to update the driver but i think that will never happen

Hello , I am AHMAD SAFUAN 28 years oldie, from malaysia well known as wanv Thanks to thermaltake for invitation,i was really active in 2016-2018 something like that so this year i was quite grateful, to join this to rise my passion about modding again, and i hope can make a new masterpiece with my skill so my mod basically i just improving the look of current modded case to look more better or i am going to ruin it to look like my face. So for now i announce my project name Is: PROJECT 0.6 so here is the one of early design and alot of fix that i do when in shower thoughts. Version 1 Version 2 Version 3/Finale

Hi everyone! iST.Modz here I am super proud to be representing United Kingdon in this amazing contest from Thermaltake. Here is some info on my modding background I started doing pc builds and repairs back in 2006 for family and gaming freinds, I done my first custom hardtube loop back in 2017 and decided to mod the case, in 2018 I entered Thermlatake UK modding trophy and won with Project Neon. I have been able to make some life time freinds along the way at events susch as Computex, Gamescon and EGX, I would like to wish all the modders good look and super stoked to be participating against such proffesional talent. Stay tuned for more updates on my project and here is a few pictures of my previous mods I built for Thermaltake. A massive thank you to all the sponsors, Thermaltake, AMD, Zotac, ASRock, Plextor, TteSPORTS and LUXA2

I saw and heard these mentioned in Computex 2018 videos of Thermaltake's setup. What's the estimated release time of these? Is there an estimated price point?

Here's the Pc Build Guide in 2018 I followed Gaming Protection Laptop I think it will also help you and these are the specs I am using right now 1: Gigabyte

Hi everyone, I recently upgraded the RGB software to v1.2.6, however, when it starts, it causes my HDD to 'disconnect'. This was learned after a few hours of troubleshooting (even did a fresh install of windows lolz). It even disappears from computer management. If I don't start the RGB software, the drive never 'disconnects'. I can always see the drive being recognized by the motherboard in the BIOS. Also, if I start the software and then try to shutdown my computer, it never actually shuts down... It seems to get 'stuck' with the RGB lights still on and then after about 15 minutes will automatically boot back up again. Neither of the two issues mentioned have happened since I have uninstalled the RGB v1.2.6 software. Is there anyway around this or do I need to wait for a software version update? Below are my computer specs, CPU: Intel - Core i7-7820X 3.6 GHz 8-Core Processor CPU Cooler: Thermaltake - Floe Riing RGB 360 TT Premium Edition 42.34 CFM Liquid CPU Cooler Motherboard: ASRock - X299 Taichi ATX LGA2066 Motherboard Memory: Corsair - Vengeance RGB 32 GB (4 x 8 GB) DDR4-3200 Memory Storage: Samsung - 960 EVO 500 GB M.2-2280 Solid State Drive Storage: Seagate - Barracuda 2 TB 3.5" 7200RPM Internal Hard Drive Video Card: EVGA - GeForce GTX 1080 Ti 11 GB FTW3 HYBRID GAMING Video Card Case: Thermaltake - View 31 TG ATX Mid Tower Case Power Supply: EVGA - SuperNOVA G3 750 W 80+ Gold Certified Fully-Modular ATX Power Supply Other: Thermaltake CL-F054-PL12SW-A Riing Plus 12 LED RGB Radiator Fan TT Premium Edition (5 Fan Pack) Also, since the new install of windows, I have lost the settings for the fans. Can anyone point me to where I might be able to download an older version of the software? Whatever version that was out during February of 2018 never gave me an issue. Thanks!

I bought this keyboard in 2018, Sydney Australia. After a year or so it started randomly making double, triple or more strokes on the 'T". Now I read that you have known about this issue since at least 2016. Well, I am going to ask for my money back. You don't seem to have any leg to stand on - you knew it was a dud product when you sold it to me. So the only fair thing in this situation is to refund me in full. I don't want to have to go the consumer affairs ombudsman, fair trade minister, telecommunications ombudsman or whoever it is that looks after shady commercial operations. All I see on this site is a lot of talk and no action. It seems like Thermaltake just simply don't care about their customers at all. If this situation isn't resolved in a timely manner I am going to make a point of highlighting this issue to the relevant authorities. Thank you.

Hi, If you go back to the old version likes 2017 or 2018, there are many updates like bug fix and new functions will be disabled. Our R&D team will have a new version this week, it should solve this issue, could you wait for a couple days?

Windows. But the problem I have is unrelated to the OS (To clarify, I'm only using Windows to test RGB Plus). Because when powering on the system, immediately the color is green. So the controller has the settings stored in hardware. How do I change those settings in hardware? Can you maybe provide me a very old version of TT RGB Plus from 2017 or 2018? I believe those versions may store the settings in hardware and newer versions of the software don't.

Ouch. After 1.5 years the Thermaltake C1000 coolant coloring came out of solution, plating my tubing, and likely destroying my RGB PC22-D5-Plus pump. I am glad that the pump / reservoir is still made and easy to re-purchase - a sign of a quality company. I had to drain what was left of the coolant, take each tube out and clean gunk with a pipe brush , install new pump, fill with new Thermaltake C1000 coolant + Red Concentrate. So this post is fair warning - drain your C1000 coolant once per year or when ever the coolant looks funky. Save your pump and unplanned down time. Photos show original purchase back in Nov 2018, followed by damage done by coolant. I show the new coolant photos, old pump I took apart for fun, and final PC after reassembly both with iPhone and with FLIR thermal camera.

Here's my two cents. I have an AMD 2700x, i also have temps being reported as 0/32 which is absolutely not correct. I've been surfing thru any potential fixes and have come across a forum linked here (https://community.thermaltake.com/index.php?/topic/64805-fix-for-riing-plus-software-116-wrong-temperature-read-outs-ryzen-incl-threadripper/) This was back in 2018. The post links an older version of the TT RGB Plus software (1.1.6 x86) that version reads the temps rather accurate but the fix that it explains does nothing and only installing the new version is useless as the problem is still there. I have a feeling it might have to do with the fact that one is a 32-bit version and the other is a 64-bit version. might be solely software at this point I can only assume lol. we shouldn't be needing to mod, make adapters or run an old version of the software. Hopefully someone reaches out, till then TT fans and products seem like a waste of money (atleast to me).

I've run into some problems trying to configure a new build, and I'm wondering if my original Riing Plus 12 TT Premium Edition fan controller is not suitable for a new Ryzen build? So I have a 3x Riing Plus 12 TT Premium RGB Fans (with a controller) and a Floe Riing RGB 240 TT Premium (2x Riing Plus fans + Floe controller) - both bought early 2018. For almost 2 years I have connected 4x fans + AIO liquid cooler to the Floe controller in a Intel build, and everything has worked fine. Now I've built a Ryzen 3600 system, and want to use all 5 fans, so currently have: - all 5 Riing Plus fans connected to the fan controller - just the AIO liquid cooler connected to the Floe controller (the daisy chain connector is blanked out to identify it as Floe controller!) - both controllers powered from molex connectors - both controllers have the DIP switch configured - fan controller is "1", floe controller is "2" - both connected to USB using the Y connector onto motherboard USB header (I can't use the daisy chain as the floe controller has the panel blanked) Despite numerous attempts, and changing DIP switches,. USB headers etc, the ONLY way I can get the fan controller 1 to be identified is if I connect it to an external USB cable. If both are connected to the Y USB cable, the fan controller 1 is not identified. Is there a controller box update / cable update that I am missing to handle a Ryzen motherboard - it would appear that only one side of the Y connector is functioning? Looking at various pictures online, my fan controller (or Floe controller) does not have the numbers embossed under the fan connector slots so you know which is which? I really don't want to have to run the USB cable from outside the case back into it. System: Ryzen 3600, Asus Strix x470-f motherboard, WD NVME drive, Corsair Power, Nitro+ RX470 Graphics Thanks, Matt

Concluded 2018 Thermaltake CaseMOD Season 2 - Talento TT. Hello. Thank you all for the votes, which guaranteed me third place. Thanks to Thermaltake for the opportunity, thank you Andy. Thermaltake celebrates the next 20th anniversary by announcing the new level 20 full tower chassis. Thermaltake has achieved several innovations in design and technology to design the new Level 20. With a game-oriented design with architectural aesthetics, the Level 20, made of aluminum, uses an aerodynamic trio camera structure to achieve ventilation optimization and space management. The three hinged stop doors are made of 4 mm thick, premium tempered glass windows that provide durability and excellent viewing capability. Level 20 is installed with the latest USB 3.1 type C port to provide 10 GB/s of transmission speed. In addition, the three built-in Riing Plus 14 RGB fans, two Lumi Plus LED tracks and a Riing Plus digital controller can be controlled with the TT TT PLUS Software. Users can control fan speed and lighting effects to create their own liquid cooling gaming system. Compatible with the latest PC hardware, AIO and DIY liquid cooling solutions, the level 20 full tower commemorative chassis offers not only unprecedented design, but also innovative performance. Concluded Thermaltake CaseMOD Season 2 - Talent TT. Modding Project : Thermaltake's 20th anniversary celebration. Cabinet: Thermaltake Level 20 Tempered Glass Edition Full Tower Chassis Project all built Handmade. I want to thank the companies sponsoring the event. Thermaltake Teamgroup Viewsonicgaming with Thermaltake’s 20th anniversary . Soon, I'll start a new post. Thank you all

Yes, i'm having exactly the same problem. I've sent a message to support..... Hi I have a Neptune Elite RGB keyboard on a PC using windows 10. All Windows updates are auto installed. Yesterday I opened the Tt eSPORTS Software and saw there was an update. I updated as per the instructions and since then my keyboard hasn't worked. There are no lights and typing doesn't work. There is power to the USB port on the keyboard because my Neros Optical RGB mouse works. I have tried: - Uninstalling the software and re-installing - Re-booting the PC - Using different USB ports - Checking the forum. One other user has the same problem yesterday. One entry from 2018 gives a link to Dropbox for firmware but the link no longer works I'm currently using the Windows on-screen keyboard. Please Help.