lostpacket Posted November 14, 2018 Report Share Posted November 14, 2018 21 hours ago, GrayFoxe said: Im in the States, and havent seen any website selling this case with PLUS version. software doesnt work wit standard fans/controller it gives an error that cannot identify it there are 3, white, RGB and RGB PLUS https://www.thermaltake.com/Chassis/Full_Tower_/View/C_00003343/View_71_Tempered_Glass_RGB_Plus_Edition/design.htm https://www.thermaltake.com/products-model.aspx?id=C_00003130 Ah, I forgot about the white. Yes, there are 3, but there is only 1 RBG version. The other is blue fan, with only 1 front, 1 rear. I think what you showed is a bad page since both RGB cases are exactly the same, just one labeled Plus.https://www.thermaltake.com/products-model.aspx?id=C_00003129 Quote Link to comment Share on other sites More sharing options...
SpiritCreations Posted November 27, 2018 Report Share Posted November 27, 2018 anyone know if you can remove the front facing dust filter and if so how? i want to change my fans but can't because of the dust filter Quote Link to comment Share on other sites More sharing options...
View71 Posted November 27, 2018 Report Share Posted November 27, 2018 5 hours ago, SpiritCreations said: anyone know if you can remove the front facing dust filter and if so how? i want to change my fans but can't because of the dust filter just open the side doors then pull off the whole front panel - no need to remove the dust mesh Quote Link to comment Share on other sites More sharing options...
Chief_AJ Posted November 28, 2018 Report Share Posted November 28, 2018 I just bought a View 71 RGB because of cyber monday sales. It has not yet arrived, but I have some questions. I plan to migrate my build to it, and add water cooling for the processor. Regarding radiator mounts, can a 240mm radiator be mounted to the right of the motherboard, where it says 360mm radiators are supported? I cannot remove the lower HDD cage, because I need to use it. If the 240mm radiator is not supported in that position, where would you recommend mounting a radiator? Quote Link to comment Share on other sites More sharing options...
LGabrielPhoto Posted November 28, 2018 Report Share Posted November 28, 2018 32 minutes ago, Chief_AJ said: I just bought a View 71 RGB because of cyber monday sales. It has not yet arrived, but I have some questions. I plan to migrate my build to it, and add water cooling for the processor. Regarding radiator mounts, can a 240mm radiator be mounted to the right of the motherboard, where it says 360mm radiators are supported? I cannot remove the lower HDD cage, because I need to use it. If the 240mm radiator is not supported in that position, where would you recommend mounting a radiator? ignore my comment. Misread your message Quote Link to comment Share on other sites More sharing options...
View71 Posted November 28, 2018 Report Share Posted November 28, 2018 6 hours ago, Chief_AJ said: I just bought a View 71 RGB because of cyber monday sales. It has not yet arrived, but I have some questions. I plan to migrate my build to it, and add water cooling for the processor. Regarding radiator mounts, can a 240mm radiator be mounted to the right of the motherboard, where it says 360mm radiators are supported? I cannot remove the lower HDD cage, because I need to use it. If the 240mm radiator is not supported in that position, where would you recommend mounting a radiator? Not sure where is your "right of the mobo" position? (front location or above/behind the cage?) I would assume you mean a behind cage mount an that means the cage has to go.. you got a front/top or bottom mount for a rad Quote Link to comment Share on other sites More sharing options...
Chief_AJ Posted November 29, 2018 Report Share Posted November 29, 2018 14 hours ago, View71 said: Not sure where is your "right of the mobo" position? (front location or above/behind the cage?) I would assume you mean a behind cage mount an that means the cage has to go.. you got a front/top or bottom mount for a rad Yes, I mean in front of the motherboard, in the position where the hard drive cages are. Upon further research, I found that I neglected the ability to mount 3.5 inch drives on the opposite side of the case's motherboard mounting wall/cable management partition (I don't know the formal term for this part). I can mount all 3 of my drives on the left side of the case (looking from the front), and fit the 360mm radiator. Quote Link to comment Share on other sites More sharing options...
View71 Posted November 29, 2018 Report Share Posted November 29, 2018 7 hours ago, Chief_AJ said: Yes, I mean in front of the motherboard, in the position where the hard drive cages are. Upon further research, I found that I neglected the ability to mount 3.5 inch drives on the opposite side of the case's motherboard mounting wall/cable management partition (I don't know the formal term for this part). I can mount all 3 of my drives on the left side of the case (looking from the front), and fit the 360mm radiator. Okay, experiment with that but keep in mind the small space available, at the backside, will heat up significantly (rad vent) The rad's heat dissipation is quite a bit especially under load I would not like to have my hdds in that place... just my thought Quote Link to comment Share on other sites More sharing options...
Darketernal3 Posted December 3, 2018 Report Share Posted December 3, 2018 On 11/28/2018 at 11:59 AM, Chief_AJ said: I just bought a View 71 RGB because of cyber monday sales. It has not yet arrived, but I have some questions. I plan to migrate my build to it, and add water cooling for the processor. Regarding radiator mounts, can a 240mm radiator be mounted to the right of the motherboard, where it says 360mm radiators are supported? I cannot remove the lower HDD cage, because I need to use it. If the 240mm radiator is not supported in that position, where would you recommend mounting a radiator? Yes, you can mount it where the 360 is mounted, but I would actually recommend either the front behind the intake fans, or the top with the fans in pull config, the fan being on the top rack. Quote Link to comment Share on other sites More sharing options...
Darketernal3 Posted December 3, 2018 Report Share Posted December 3, 2018 Alright, so I finished my build a few weeks ago, but I was searching for minor tid bits of things and stumbled on this fourms, thought I might show you my build. Give some inspiration, and maybe different layout presentation. And in general to show off my build Quote Link to comment Share on other sites More sharing options...
Chief_AJ Posted December 5, 2018 Report Share Posted December 5, 2018 It looks fantastic. Are you running 2 radiators? Quote Link to comment Share on other sites More sharing options...
Darketernal3 Posted December 6, 2018 Report Share Posted December 6, 2018 On 12/4/2018 at 9:21 PM, Chief_AJ said: It looks fantastic. Are you running 2 radiators? Single 420 rad on top. Was thinking maybe adding more, but I'll add as I go, always easy to add if needed. Quote Link to comment Share on other sites More sharing options...
instinct_2k Posted January 2, 2019 Report Share Posted January 2, 2019 Hi Everyone, Currently building a NAS / Plex / Gaming Threadripper machine in a View 71, Does anyone know where i can get any additional drive cages in the UK?? 7 disks just isn't enough!!! LOL Instinct_2k Quote Link to comment Share on other sites More sharing options...
rahul762 Posted January 12, 2019 Report Share Posted January 12, 2019 Hello, There. Just assembled my pc with RGB version of this case. But i think there is some issue with the RGB fans. The lights are static glowing with no effects. I tried changing the lights from the included remote and all the colors are static with no effects. Is this normal or am I missing something here? Quote Link to comment Share on other sites More sharing options...
Tony Monaco Posted January 20, 2019 Report Share Posted January 20, 2019 I just bought the V71 RGB and am looking to purchase 2 additional modular drive bays. Each of the 2 bays that came with my case hold 2 - 3.5 in HDD's. Anyone who is not using theirs want to sell them? I will purchase from you. I know many people are not using them. Thanks! Quote Link to comment Share on other sites More sharing options...
thenotoriousmma Posted January 22, 2019 Report Share Posted January 22, 2019 New Custom Loop : -Asus Xi FormuLa Z390 -8700K @5,2Ghz / 1,390V -32Gb Corsair Dominator 3200Mhz -Asus Rog Strix Gtx 1080Ti OC Edition -Samsung 970Pro 512GB , Samsung 950Pro 512GB , Samsung 850Pro 256Gb , WD 1TB Caivar Black -EVGA SuperNOVA 1000W 80+ Platinum (White Sleeve) -Fan's : 9Pcs Corsair LL 120MM RGB , 1Pcs Corsair 140MM , 3Pcs 120MM Ekwb Vardar Evo -Fan Controller : 2Pcs Corsair Commander Pro -Lighting Controller : 2Pcs Corsair Lighting Node Pro RGB -Thermaltake Pacific RL360 Radiator -Ekwb 360MM PE Radiator -EK-XRES 140 Revo D5 RGB PWM (incl. sl. pump) -EK-FC1080 GTX Ti Strix - Nickel (rev. 2.0) -EK-FC1080 GTX Ti Backplate - Nickel (rev. 2.0) -Thermaltake Pacific Flow Indicator Two -Thermaltake Pacific Temperature Sensor - All Custom Fitting's by Ekwb Quote Link to comment Share on other sites More sharing options...
Uther Pendragon Posted January 24, 2019 Report Share Posted January 24, 2019 I wanted a Blu-Ray burner for my View 71, but there wasn't a 5.25 drive bay. So shopping around I found this ASUS burner and it had good reviews. Being an ASUS buyer (ASUS ROG is the MB and two ROG video cards are in the case), and seeing that the styling was very close to the View 71 case, I bought one from Newegg. Pricey I know but it hit all my check boxes. https://www.newegg.com/Product/Product.aspx?Item=N82E16827135378&nm_mc=OTC-Hatch&cm_mmc=OTC-Hatch-_-ASUS-_-CD%2fDVD ROM%2fRW Drives - External-_-27135378&RandomID=52933682286213020190124093159 Quote Link to comment Share on other sites More sharing options...
darkc Posted January 25, 2019 Report Share Posted January 25, 2019 Can somebody please tell me where I can buy another drive cage for the View 71? It comes with 2 and there is space for one more. I have 6 drive 3.5" drives. I currently have two of them on the back but it aesthetically displeases me a lot. Also I don't know how good it is long-term for a 3.5" drive to be vertically placed. I know its probably not a real concern but still, it makes me uneasy. I do see a drive cage on the TTstore which is the Hard Drive Cage with Trays for F31/F51/X31/X71/View 31/View 37 [<-clickable link] but that's not the same one that comes with the View 71 and its also been out of stock since November 2018 (or more, only had this case for 3 months). Quote Link to comment Share on other sites More sharing options...
jusumoner Posted January 28, 2019 Report Share Posted January 28, 2019 Hi guys, i hope yall can help me. I got a question about a radiator support for this case that i own. The radiator support on the right side of the case, like on the panel that house the HDD bay's. On the spec sheet it's only says about 360 or 420 mm rad support. There my question can i put a 240 or 280 in there or only 3 fan rad setup will work. I really think that there no problem in putting a smaller one but i just wanted to make sure before i throw some money. Thanks everyone, have a nice day! Quote Link to comment Share on other sites More sharing options...
View71 Posted January 28, 2019 Report Share Posted January 28, 2019 6 minutes ago, jusumoner said: Hi guys, i hope yall can help me. I got a question about a radiator support for this case that i own. The radiator support on the right side of the case, like on the panel that house the HDD bay's. On the spec sheet it's only says about 360 or 420 mm rad support. There my question can i put a 240 or 280 in there or only 3 fan rad setup will work. I really think that there no problem in putting a smaller one but i just wanted to make sure before i throw some money. Thanks everyone, have a nice day! You can always mount a smaller Rad. no problem but watch the hose length to still fit on the CPU - it can get too short! Quote Link to comment Share on other sites More sharing options...
Ecko1313 Posted January 28, 2019 Report Share Posted January 28, 2019 Question guys, This will be my first time build so bare with me I’m by every mean of the term a noob. So I got the none rbg version of the view 71. I have a Corsair - H100i PRO 75 CFM Liquid CPU Cooler , and I believe it came with 2 140 fans. My question is am I ok with the fans that came with it or should I order other fans I’ve seen a lot of YouTube videos saying they replaced the fans and added more on top of that any suggestions? Quote Link to comment Share on other sites More sharing options...
Antaresuk Posted January 30, 2019 Report Share Posted January 30, 2019 Hey yo I am having difficulty finding the TT Core 71 with the blue drive bays. The few UK resellers only seem to have it in black. Are the blue bays not made anymore? Thanks Dave Quote Link to comment Share on other sites More sharing options...
godevskii Posted February 20, 2019 Report Share Posted February 20, 2019 Hello, i decided to share my TT V71 here, almost 9 months after buying the case, only now i had the chance and courage to make hardware swap from a NZXT Switch 810. You will see that my living room became a mess with hardware everywhere, 3 rads 1x120+1x240+1x360, 15 fans, 2 fan controllers, ####, it was a nightmare on my NZXT, now i swapped one of the rads and have 1x120+2x360 and dumped the push/pull config and have only push or pull. No fan controller anymore, i used some splitters and connected everything to the MB. Have 8 fans in total, almost half of what i had... Also delided the cpu applying liquid metal, and replaced the old reservoir with new bigger better one. Quote Link to comment Share on other sites More sharing options...
View71 Posted February 20, 2019 Report Share Posted February 20, 2019 godevskii It certainly kept you busy for a while - I wish I would find the time to clean up the cable mess on the right Quote Link to comment Share on other sites More sharing options...
godevskii Posted February 21, 2019 Report Share Posted February 21, 2019 @View71you just need to take your time tying the cables before they get to the back in a big bundle, i shortened the fan cables tying them along side of the fans so they have no more nor less length then what they need to get to the splitter, there's actually very good places to put hidden splitters on this case. Overall it's still a bit messy on the back, but considering the amount of stuff that i have and using extensions and not fully custom cables i guess it's OK and can't get much better than this. I'm very happy with the case despite having to do a couple hard mods. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.