RWitts

WOW! Was not expecting to see my name up there! 

I'm honestly blown away by all the support I've had over the duration of the competition, this was an amazing opportunity for me to do something different, I really enjoyed being a part of it and so, thank you Thermaltake for making this possible and to everyone who voted too, without them I wouldn't be up there with the other 2 winners, which I may add congratulations to them too! ❤️ 

Hi Everybody,
I'm Tom from sunny Birmingham, UK. I work as a software engineer / web developer which I've been doing since university and mainly play PC games and run in my spare time.
Been building and modding computers since around 15. My first mod was a side window cut-out and blue CCFL tube lighting, was so proud of that at the time (simpler times). Started water cooling at university on an overlclocked Q6600 which kicked out a lot of heat and kept it up ever since. Current PC is an ITX build with a 280mm and 120mm rad which has been a little workhorse / hotbox for the past year. 
Onto this considerably more substantial build as a result of being selected for the Thermaltake UK 2020 Case Mod Challenge which has been awesome 😄 and the perfect distraction from current events. Been spending the past couple weeks getting everything together for the planned mods. Anyhow, onto the parts list:
Thermaltake View 51 Snow AMD 3700X Thermaltake TOUGHRAM RGB 3000MHz 4x8GB ASUS ROG STRIX X570-F Gaming ASUS Radeon RX 5700 500GB Seagate FireCuda 520 14TB Seagate IronWolf Pro Thermaltake Pacific C360 DDC Hard Tube Water Cooling Kit Thermaltake Pacific V-RX 5700 Series Plus GPU Waterblock Thermaltake Water Cooling Pacific Hard Tube Bending Kit 300mm Thermaltake TTMod Sleeved Cables 300mm Thermaltake TTPremium PCIe Extender 850W Thermaltake Toughpower GF1 A couple photos of all the parts received:


Thank you to Thermaltake, AMD, ASUS, Seagate and Scan for sponsoring and who've done a great job at getting the parts together in such trying times.
Will be updating this thread over the coming weeks with my progress, at the moment just going to do a quick test set-up and take some case measurements.
Best of luck for everyone in the competition and happy building! 😀
Tom

Hi I'm colin Mcnally from consett in durham. Iv been building gaming PC's for around 10 years when I started sim racing after moving from console's. The last 2 years iv started doing full custom water loops in mine and a few friends PC's. This will be my first themed build so I thought I would include my other hobbie/passion which is motorbikes. Project motogp will include moving parts and a motorbike stand.
I'll like to thank all the sponsors for all the hard work in these tough times for making this possible.
The first parts from scan arrived yesterday which include 
ThermalTake View 51 Snow ASUS ROG STRIX X570-F Gaming ASUS Radeon RX 5700 500GB Seagate FireCuda 520 14TB Seagate IronWolf Pro 850W Thermaltake Toughpower GF1 Thermaltake Pacific Hard Tube Water Cooling Kit Thermaltake Pacific V-RX 5700 Series Plus GPU Waterblock Thermaltake Water Cooling Pacific Hard Tube Bending Kit 300mm Thermaltake TtMod Sleeved Cables 300mm Thermaltake TT Premium PCIe Extender With more parts coming soon I'll be starting my build in the next few days and will post as much as I can.
Thanks again to 
Thermaltake 
Scan computers 
AMD
seagate 
Asus 
Ttuk2020casemodchallenge 
I'll also like to wish the other 4 competitors the best of luck stay safe and have fun building.

Hello Guys,
Sorry for the delay but here are the first few giveaway winners! congrats! 
 
Please send TT Andy a inbox message before December 1st to claim your prize!
 
[Pre Event Predictions] (August 23rd ~ September 20th)
Winners:
Floe 240 AIO cooler : แตงกิ้ว ฮิฮิ้วฮิฮิ้ว
Core P5 V2: killermob001
 
 
 
Prediction Voting Event (September 20th ~ October 18th)
Winners:
Level 20 VT: xakasepe
TOUGHRAM RGB Memory DDR4 3000MHz 16GB (8GB x 2): TomikoV1
 
 
 
Download TT MOD Giveaways
Toughpower PF1 ARGB 850W PSU: Zaenal M
Floe DX RGB 240 TT Premium Edition: Nurfalah Ai
 

Thanks bud!
 
I planned the whole weekend for measuring, cutting, drilling, filing, sanding etc
 

 

 

 

 
 
Ahh yes .. what I've been waiting for!
 

 
 
One arm should be able to hold 63kg.
 

 
 
Not much left of the internals.
 

 
 
Bottom shot
 

 
 
So lets cut! (tried the dremel once again .. screw that)
 

 

 

 

 
 
Cover plate for right side of the desk where normally the mainboard goes
 

 

 

 
 
More filing needed
 

 
 
And holes
 

 
 
Also countersinking the PSU
 

 

 

 

 
 
Sorry, I don't like stickers ^^
 

 
 
Rads also more inside
 

 
 
More holes, drilling and sanding.
 

 
 
Just had to test the fans
 

 

Thanks for voting guys, we will release the winners in the next few days

Thanks guys for voting, we will release the winners soon!

Thanks Guys for entering, this event is officially over!!
I will be releasing the winners in the next couple of days, good luck all!! 
Don't worry if you missed out, head over to our next event!!
 
LINK: http://community.thermaltake.com/index.php?/topic/2107-prediction-voting/ 

Herroooooo everyone. It is almost time for Insomnia I55 in august 2015 and before Computex 2015 I have been asked by Thermaltake Europe if I was interested in doing a project for them to put on display. :thumb:
Of course my ego was all over the place and I was hovering 50cm above the ground as I love doing these projects and I love being asked by brands so I said F**K YEAH!
The project was quite straight forward: we use the new Suppressor case, add all parts Thermaltake does like fans, PSU and all of their watercooling equipment and make something that is worth looking at.
Perfect assignment for men. Keep it simple. I can understand this.
I still had some hardware at home and for other stuff I contacted a few people I worked with before. And before I knew it this thing was on a roll.
I need to finish this project like 2 weeks from now. So I figured I should start a log about what I have been doing for the last couple of weeks since I have everything.
This will be a short log I think with rather large photo updates. I hope you will enjoy.
 

 
First of all I want to thank Thermaltake and Martin in particular for the opportunity.
I have a bunch of photos of the unboxing of the new case ending in a photo of the front panel being taken apart both with the screwdriver and a saw to create something I will show you later on
 
Don't worry there will be a LOT of modding involved in updates coming later on.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
OUT!!! All of you!!!
 

 
I have a rather cool (I hope) idea for the front end. I want to keep the lining and shape of the original case intact but still make its appearance different.
 

Thanks for your patience guys! 
The winners for the Prediction Voting Event are listed below, please send a inbox message to me and please include your shipping details!
We will be shipping out your items when the event has ended 
 
Thermaltake Core X2  = Mumbie
Thermaltake TR2 600W Bronze = x4ngus
Thermaltake Water 3.0 Extreme S  = Fulga
ASUS B85M-GAMER mATX  = Notesoul
Thermaltake Riing 12 LED x 2  = maxmyasato
Avexir Core Series Tt Edition   = Orel Hardy
TteSports Challenger Prime = bucketoffail
Luxa 2 EnerG 6660mAh Power Bank = tem214

This year we ran our first Thermaltake CaseMOD Invitational.
We invited 7 modders from 7 countries to showcase their skills in a casemod Invitational battle!!
 
So far the builds have all come out awesome and the modders are at the completion stages of the build, the time has come when we pick a winner for this years contest!
 
 
Help us crown this year’s CaseMOD Invitational's winner to be in a chance to win awesome prizes from: 
 

 
 
To enter the competition is simple. All you have to do is vote for your favorite mod by selecting your winner and you will be in the draw to WIN!
Reminder: You must be a member to vote on the poll seen at the top of this page, head over to the link below if you are having problems voting
http://casemod2015.thermaltake.com/voteForMe.html 
 
Week 1 Prizes

Week 2 Prizes

 
 
For the modders build logs please refer to the links below
(AU) Stuart Tonks              http://casemod2015.thermaltake.com/ModderProfile_au.html 
(UK) Richi Bowzer              http://casemod2015.thermaltake.com/ModderProfile_uk.html 
(FR) Mathieu Delsuc          http://casemod2015.thermaltake.com/ModderProfile_fr.html 
(US)Nick Blackwell             http://casemod2015.thermaltake.com/ModderProfile_us.html 
(DE)Andy Weber                http://casemod2015.thermaltake.com/ModderProfile_de.html 
(JP) Fabio Moma                http://casemod2015.thermaltake.com/ModderProfile_jp.html 
(TH) Suchao Prowphong    http://casemod2015.thermaltake.com/ModderProfile_th.html

Ok back onto the mod, a few minor things for you guys to look at, first a very very small little add on, why it may be pointless due to the fact it will be hidden with panels on, I have got a bit rectal about the smaller details in my builds, hence the cable routing I posted earlier, I could of easily just left the wires out as they would not have been seen down there, but in reality I would of known they were messy.. 
 
This feature is nothing major but something I wanted to try. 
 




 
So why it is only a piece of vinyl added to the rad it has a little trick up its sleeve.
 




 
Yes the vinyl has a heat reactive ink that changes through quite a few colours the warmer it gets, so if you like a small rad temp sensor .
 




 
Also on today’s agenda was to prep the graphics card ready to go in the build as it will be all put together soon, the only problem here was I got bored just looking at the GPU block so soothing had to be done that side tracked me lol…
 




















 
Just a small little detail added, that you might be just able to see once rig is complete but hey, even the devil likes small details on a build even if you can’t see them.  Now let us take a little look back at the acrylic piece that separates the mobo and the rest of the build.
 




 
I do not like the joined together pieces looking so different and why it is another part of the build that won’t be seen, it has to be tidied up.
 




 
That’s better, it looks a lot more uniform than it did after a few minutes on the acrylic scraper.
Expect a lot more updates as I get nearer and nearer to the end of this build.

Richi Bowzer

Welcome to another project I am doing at the moment (other build is F1 themed) for the Thermaltake Invitational 2015 Mod completion, my theme for this build is Illusionist, I am either going to go big or go home and try to create an illusion with the innards, it might not even work, but that’s my risk.
 
First let me start out by saying a big thank you to my sponsors for this build, first up we have the main sponsor of course.
 
First off let me start off with a big thanks to the sponsors that jumped on board.
 

 
Website/Facebook/YouTube
 
 
Thermaltake obviously who are organising the competition and for supplying  X9 case and a whole range of products from the Case, cooler, tubes and rads as well as the fans.
 

 
Website/Facebook/YouTube
 
A Big thank you goes out to Gigabyte who is supplying the motherboard for this project.
 

 
Website/Facebook/YouTube
 
A big thank you to XFX for supplying the 290x for this Project
 

 
Website/Facebook/YouTube
 
Not forgetting OCZ who supplied the 2 x 240GB OCZ Vector 150 SSDS for the build.
 

 
Website/Facebook/YouTube
 
Massive thanks to AVEXIR for supplying the memory kit for the build
 
 

 
Website/Facebook/Twitter
 
Big thanks to V1 Tech for the custom grills and GPU backplate

 
Website/Facebook/YouTube
 
Thanks to Dremel who seem to step up on every build and supply me with accessories and tools.
First up the case, we have all seen it – the Thermaltake X9.
 
It’s completely insane size wise, but has all the room you need for multiple loops, with extra-large radiators.
So be prepared to laugh at my demise or join in the fun as I try to make an illusion happen inside and enjoy the roller coaster ride we have of creating a build within one month.
 
Specs:
 
·        Case - Thermaltake Core X9
·        CPU - Intel i5 4690
·        Motherboard –  Gigabyte Z97MX-Gaming 5
·        Graphics – XFX R290X
·        Memory - 4 x 4Gb Avexir Blitz 1.1 – 1600mhz
·        Hard Drives - 2 x 240 Gb OCZ Vector 150 SSD’s
 
So let me give you some idea of what I am about to create, my plan is to make themed case, with not much done to the outside (unless of course you class a custom candy red paint job as custom).
 
Most of my work is going to be done to the insides really creating separate compartments for Motherboard and GPU and thus making it a bit of an illusion depending which side you are looking from, one thing I should point out is I will be trying things with reflections too, Just to see if I can achieve a certain effect. This will either work or fail but hey you don’t do anything in modding without trying.
 
Enjoy the build all.

Hello I Suchao Prowphong in Thailand. When I was watching the movie Fast And Furious 7 Movies that I like a lot. And to see all the repeats. So many people come up with ideas that sparked one of them is an actor named Paul Walker. His focus imply. There is hope, belief and faith. I miss him Although he goodbye body will be lost But the memories are still in my mind. And the world forever     Tower or instant case it is the first time for me. I urge all people lucky. And love what you do. I'm sorry I have bad language, please take a photo of me, instead of communicating to you. Thank.     Sponsored by                         https://www.facebook.com/suchao.prowphong     https://www.facebook.com/IndyLaserBanglen?fref=ts Hardware Case - Thermaltake Core X9  X2 CPU - Intel Core i5-4670K  CPU - Intel Core i7-4770K  Motherboard - ASUS MAXIMUS VII FORMULA X2 Memory - AVEXIR CORE SERIES 8GB 1600MHz Kit - WHITE LIGHT X4 Graphic Card - ASUS GTX 970 STRIX 4GB DDR5 X2 Harddisk Drive  - 2TB X2 Solid State Drive - 256 X2 Power Supply - Thermaltake Toughpower Grand 850W Platinum X2 Fans - Thermaltake Riing Fans x30 Fan Controllor - Tt commander FT X2 Fan Hub - Commander FX 10 Port X4   Cooling All Component water cooling system by Thermaltake LCS.    

Our friends over at Scan Computers are giving away a Thermaltake Core X9 !!
Click Here to Enter! 
 
Closing date for this competition is Tuesday March 31, 2015
Open for UK residents only

This week for #CES2015 we have announced the Pacific Series DIY LCS (Liquid Cooling System) Components. 
 
We have a TON of new stuff coming, this is just the start! 
 
Pacific RL240 DIY LCS Kit: (CES Exclusive Launch)
 
Buy Now: http://www.newegg.com/Product/Product.aspx?Item=N82E16835106254
 

 
 
We will continue to update on the full line of Pacific Series DIY LCS Components as they become available!
 
For more information on our Pacific Series Components including, CPU Block, Pump, Radiator and accessories visit our website:
 
http://www.thermaltakeusa.com/cooler.aspx 

Here are some more!
 









 

Just in case you guys couldn't make it, here are some photos from CES 2015!!
 

I put a PC together for my daughter for Christmas (and picked up a PCIe SSD for me) The PSU is a little low but it was free (i will replace it with a Toughpower Grand 850W Fully Modular as soon as i get chance. And the H100 is terrible, would not fit in any case i had so i used the stock Intel cooler (should have got a good cooler like the Water 3.0 Performer) but other than that its running great and she loves it.
Now she can Play Minecraft on Ultra

Announcing the winners for the final week! Congratulations guys!
Please inbox me with your details!
 
Prize 1: Toughpower DPS G
Ronald DMNKLR Smith
 
Prize 2: VERTO Headset
R witts
 
Prize 3: Tt Dude Package
Marcam923
 

Hi Guys, thank you all for cooperating with us for this contest/ giveaway i want to apologize for all the changes since the launch of this game
Anyway, without further adieu here are our weekly winners, congratulations guys, please inbox me with your shipping details!
Sill have 1 more week, so if you didn't win feel free to enter again
 
Prize 1 Poseidon Z
RVFER
 
Prize 2 Ventus Mouse
HappyBuddhaman
 
Prize 3 Tt Dude Package
CyberDustin777
 
 

This holiday season we will be running a Tt dude and Santa game competition on our Community Forums! Play the Tt dude and Santa’s Ball-Bustin’ Bajinko Game and post a screenshot of your score for your chance to win!
There will be 3 winners each week so join the fun and win big!
Please read the rules carefully before starting the game.
Prizes will only go out to forum members, if you are not a member yet, don’t worry, it's free to join!
 
CLICK HERE TO PLAY: GAME LINK         NOTE: If round 2 is not showing up correctly please clear your cookies
 

 
<Rules have changed please read>
 
Game Rules
Simply qualify to win by posting a screenshot of your end score on this thread and we will be randomly picking a winner!
The competition is global and the winners will be announced each week on Tt community forums, then will be placed in the winners tab.
 
Prizes Include:
Thermaltake Water 3.0 Ultimate
Thermaltake Toughpower DPS G
TteSports Poseidon Z Illuminated Mechanical Gaming Keyboard
TteSports LADON Gaming Mouse pad
TteSports VENTUS Gaming Mouse
TteSports VERTO Gaming Headset
Tt Dude Package x 3