Jump to content
  • Forum Statistics

    8,136
    Total Topics
    42,038
    Total Posts
  • Member Statistics

    49,344
    Total Members
    16,800
    Most Online
    Pune call Girls
    Newest Member
    Pune call Girls
    Joined

eqeqeqe

Members
  • Content Count

    0
  • Joined

  • Last visited


Reputation Activity

  1. Like
    eqeqeqe reacted to PaYFrog Customs in [Buildlog] Thermaltake Core x9 - "White Memory"   
    Dear PC enthusiasts, 
    today I want to introduce to you my second Thermaltake Core x9 build. This time I want to do something other than last time. I allready made some changes, so you can still see the concept.  



    Basement:



    Concept:
    The case will be seperated horizontaly. The lower part of the case will be holding two 480mm/60mm radiators. The new cover on each side of the case will hold one of them. Behind the front I will add an HDD/SSD cage, so you can mount them easily. The PSU will get a new position in the upper of the case. Mounted right behind the front, you got a great view on the PSU and the cables. Next to it I will mount the reservoir and go straight to the midplate into the lower section of the case. To get a good view all over the case I will install acrylic plates in the top and both sides. 



    Hope you like this build. 
    Stay tuned
  2. Like
    eqeqeqe reacted to ThermalMike in **ATTN Users with Thermaltake Riser Cables**   
    It was actually a lot more.. but yes it did sell out rather quickly.
     
    Can you PM me some details on the cable not lining up from Newegg?
    I can help with a replacement and more, just send me some details and a quick picture.
  3. Like
    eqeqeqe reacted to Mr_Armageddon in Project Open Core: Liquid P5, Hardline Tubing, Illuminated System Panel   
    Project Open Core: Thermaltake P5 Build (Introduction)  
       
     
    I have been using my current build for almost 5 years now, and it is time for an upgrade!  Not only are the components getting a bit long in the tooth, but I recently received my Oculus Rift VR Headset, and my system just wasn't ready to help me step into the world of virtual reality.   
     
       
     
    For this new build, will be using the Thermaltake Core P5, open air case.  This time around decided to go with hard acrylic tubing, so I did a 3D render in Google SketchUp to get a better idea of how things would be installed, and what kind of bends I will need to do.  
     
       
     
     
     
     
       
     
    This is going to be a bit different from by previous builds using the Corsair 800D, as there will not be much "modding" required to the case itself (we will see if that holds true).  I really like the design of the Core P5, and am looking forward to seeing what I can create using it.  
     
       
     
    I will be including some custom lighting as well, but still deciding which direction I want to go with the acrylic panels, and lighting source.  Testing both RGB LED light strips and EL Wire at the moment.  
     
       
     
    I will go into more detail regarding the components that will be used in a future post. Until then, check out this short video showing the 3D render from a few different angles.  
     
       
     
     
     
     
  4. Like
    eqeqeqe reacted to Stephanisk in Core P5. Complete 3D model in solidworks   
    Hi everyone,
     
     
    I recently purchased a Core P5 case and i will be modding this case heavily, so first job was to make a highly accurate model of the case. So i did and i wanted to share this with everyone who feels like building a core P5 mod.
     

     
    I uploaded the files to Grabcad as here i am limited, but you can find it right here:
     
    https://grabcad.com/library/thermaltake-core-p5-2
     
    I have worked a serious amount of hours on this model, so please if you use it and you write about it, please mention me somewhere, that would be highly appreciate.
     
    If you are going to use the model for milling on CNC than just check the alignment of holes of the pieces you already installed. I am quite confident i didnt miss something but you never know, i will be using this model anyhow to put it directly onto my CNC router.
     
    I will be adding a complete build log as i progress, cause now i can finally start building a real mod, the hard hours of  design are over
     
    Have fun with it.  Regards,
     
    Stephane
  5. Like
    eqeqeqe reacted to Erik Bmods in THERMALTAKE CORE X71 CUSTOM WATERCOOLED BUILD.   
    A couple pics of my Thermaltake core x71 custom watercooled build. Cheers!
     
    A small Vid of my build with temp testing and specs.
     









  6. Like
    eqeqeqe reacted to _ThE_PsYcHoTiK_ in **ATTN Users with Thermaltake Riser Cables**   
    Mike, I send you an Email, my remplacement cable has the same problem.... :/
  7. Like
    eqeqeqe reacted to JamesRill in guest test title   
    Long Beach , February 2, 2017
    Crime & Courts news - Murders, Trials, and more...
    The latest
    - Missing Persons : Sonia S Georgina M Nola A Laverne A Donny H Maura M Lizzie D Lucio C Mauricio A Teddy C Frankie P Phil B Louie M Frankie W Neva H . ...
    To family, We are very sorry for your loss...
    Your friends - Louella S Dirk C Haley R Nicole P Lamar R Kristi S Ward C Lucy M Dena D Krystal J Caleb A Jermaine G .
  8. Like
    eqeqeqe reacted to Tt Andy in Welcome   
    Welcome to the System build thread! 
     
    In the system builds section of the forum you can share photos of your rig, build logs or even come here to ask questions regarding system builds! 
     
    Please take a minute to read the rules
     
    Tt community forums are a place where people can interact and have discussions about several different topics. However, we ask that you follow these simple guidelines to ensure that the forums have some productive conversation. These rules and guidelines are enforced by administrators and moderators, and at their discretion, may delete posts without warning that do not comply. Also, failure to comply with these rules may result in a ban from the forums or the entire site!
     
    - No "Flaming" -- writing hostile or insulting messages aimed at other users for their views, comments, status as a user on the site, or any other reason. You can disagree with someone's views and still be polite about it.
    - No "Trolling" -- posting controversial (sometimes off-topic) messages with the intent of baiting other users to reply.
    - No "Spamming" -- No advertisements, or referral links to other services. We also classify "spam" as short replies which do not contribute to a forum thread in a positive manner. Some forum threads expect short messages, but otherwise short messages are highly discouraged. Do not post for the sake of forum post count... your posts will be removed if we see you posting unhelpful or non-contributing messages.
    - No "Necro" behavior -- posting replies on very old (dead) threads which have not been locked. We only allow "Necro" replies in VERY rare circumstances, all other cases will find your reply removed. If you feel strongly enough about posting a reply, please discuss with a Moderator whether to start a new thread of discussion.
    - No discussions of software piracy, hacking, illegal material, or linking to these activities will be tolerated.
    - Do not post material that is hateful or mean towards race, religion, ####, or any other offensive nature.
    - Do not post offensive content, or links to offensive content. Keep everything Safe for Work, and remember that kids visit the web site.
    - No excessive swearing or language. If you're that angry about something, take a break from the forums for a while, or confront the other user directly instead of in the forums. Also, do not attempt to use any means to bypass our profanity filter, such as misspelling a cuss word, or using punctuation or spaces. We are much more likely to ban users for this behavior than those who let the profanity filter replace cuss words with *'s instead. Still, excessive swearing can get you in trouble too, so keep it clean.
    - No posting of any text which bypasses our profanity filters by purposely misspelling, using letter/symbol substitutions or any other means to bypass our censoring. You will only get one warning for this, then you will be banned from the site.
    - Please do not "hijack" a forum thread by changing the subject. If you want to change the subject, please start a new message thread.
    - Do not complain about getting banned, and do not make another account to circumvent a ban. Do not complain about other users being banned, in the forums or on profile pages of other users.
    - Do not complain if a moderator removes a message you posted. We trust our moderators, and if they've removed a message, they had a good reason.
    - Do not post any personal information about you or anyone else. We don't want to know your street address.
    - Turn off your caps lock, do not use excessive ALL CAPS in your posts.
    - Do not post messages containing images of typed text, especially in an alternate color. This confuses other members who may think you have some special authority, which is against our Terms and Conditions. It also defeats our search engine, which cannot read your message text.
     
    Thank you for your cooperation and have fun
  9. Like
    eqeqeqe reacted to Gremory830 in **ATTN Users with Thermaltake Riser Cables**   
    Don't get me wrong the case is #### awesome. It's just that riser cable that is a screw up.. not even sure if yall are the oem on that cable or if its something yall bought and sold with the case. 
     
    http://i.imgur.com/ES5HoVF.jpg
  10. Like
    eqeqeqe reacted to LulaBurd11 in anonymous,uncategorized,misc,general,other   
    Gen
    ihnen sind Kriegsverletzte aus dem 1. Weltkrieg
    von 1916 abgebildet, neben aus DEM 2. Weltkrieg
    von Seiten 1944 aus Italien. Neben den Kriegsverletzungen
    bestanden oftmals Probleme dadurch, dass zusammen mit DEM
    Ausspähen nach einer für jedes Chip Abhebung eines Rundstiellappens
    geeigneten Fläche Tätowierungen
    dieser Haut bremsend waren. Jener hinaus . Abb. 3.26
    begonnene Satz „Plus ça change“ wird hinauf einem
    weiteren Skizzenblatt abgesperrt mit: „plus
    c’est la même chose“.
    Die Künstler, die die Kriegsverletzten gen ihren
    Bildern festhielten, empfanden dennoch der Unterschied
    jener Kriege obendrein Orte, an denen die
    Soldaten gegenseitig Chip Wunden zugezogen hatten, dass
    solche angesichts ein gleiches Schicksal verbunden Auto.
    Durch den gen den Bildern erfolgten Ãœberschriften
    „Plus ça change – nebst c’est la même chose“ wird
    eingeschlossen dem Bezeichner „One of the many“ als nächstes hingewiesen,
    dass es einander unter den unzähligen Kriegsverletzten
    im Sinn des „Übereinstimmens solcher Gleichzeitigkeit
    des Vergangenen auch weil der Zukunft“ entsprechend
    Gadamer zu Händen die zwei Getroffenen um dieses für die Gesamtheit
    Gesichtsverletzten gleiche Schicksal handelt.
     
    Stop by my site Fettabsaugung OP femmestyle
  11. Like
    eqeqeqe reacted to Mr_Armageddon in Project Open Core: Liquid P5, Hardline Tubing, Illuminated System Panel   
    Project Open Core: Hardware - Radiator & Fans

    My previous build I had 2 separate radiators, one for each loop.  A 360 for the CPU, MoBo, and RAM, and a 240 for the GPUs in Push/Pull configuration.  I have a few less waterblocks this go around, and will not be running SLI, so I opted for a single Alphacool NexXxoS 480 Radiator.  Look and feel is very nice, and the reviews I was able to find show that it performs really well.

    Also picked up an inexpensive “gasket†to go between the rad and fans.



    One thing I really like about this rad is that it has 6 inlets + 1 fill / bleed port at the top.  Tons of configuration options with that layout.  They also put a metal gaurd below the screw mounts so you don’t damage the radiator fins by going in too far.  That is something my last set of radiators did not have, and is a nice addition.  

    Comes with everything you need to get started, including port plugs and various lengths of fan and mounting screws.



    For the fans on this build, going with the Thermaltake Riing 120mm Blue LED Fans (x4).  These ones are specifically made to work with with radiators (static pressure), and the blue LED accent around the fan is a nice touch.  I saw at computex they just released an RGB version, but for now blue is fine.



    I did have to do some cable clean up to make this look nicer. Basically cut to length, sleeved and combined 2 pairs of cables to meet back up at the fan controller.  I didn’t want to have 4 separate cables running through the case so combined  them for a cleaner look.  

    Verified with ASUS that the fan headers on the MAXIMUS Formula VIII support 1A per header.  Tested these fans and even at peak, none generated more than 160mA.  Combining 4 fans on one header is still well below the max supported current, and will allow for easier fan control.



    Although not really a fan controller, the 4 fans meet back up at a Phobya 4Pin PWM to 4x 4Pin Fan Splitter.  They basically act as 1 fan now, and I will use the  ASUS AI Suite Software to control rotation and noise based on temperature curves.



    Picture of all 4 installed and spinning up with a nice blue glow. I kind of wish the blue were a bit more towards the green side of the color scale for a lighter blue, as these look a bit more purple.  Will have to play with the RGB setting on rest of the LEDs on the system, and will find something that works for everything.



    For High Resolution versions of all photos from this build log, pleas check out the Album on Flickr.
    https://www.flickr.com/gp/24705522@N05/yB94Z9
    .
    .
  12. Like
    eqeqeqe reacted to BabaLament in WP100 - Early Days.   
    Hello all! After a year and change with my V51 Build (photos in V51 Owners Forum), I decided to go big w/ the WP100 chassis.
     
    Breaking down the build (as is):
     
    Thermaltake WP100 Chassis
    Intel i7-6800k
    EVGA x99 Classifed
    128GB Corsair Vengeance LPX @3k
    OCZ 256GB M.2 SSD
    4x EVGA Hydro Copper GTX 980
    EVGA 4-Way SLI Pro Bridge, Version 2
    Toshiba OCZ 256GB M.2 SSD
    Western Digital 500GB Velociraptor SATA III HD
    EVGA T2 1600w PSU
    Thermaltake PR22+D5 w/ Silent Pump/Reservoir
    2x Thermaltake RL280 Heat Exchanger
    5x Thermaltake Riing RGB 140mm Fans
    4x Thermaltake Riing RGB 120mm Fans *NOTE: One of the fans isn't aligned properly & clips the side of the fan case; sounds terrible. Tt RMA inprog.
    6x Thermaltake Lumi RGB LED Strips
    3x Swiftech 41-65mm Male-to-Male Lok-Seal Fittings
    10x Thermaltake Pacific 90-Degree Elbow Fitting
    11x Thermaltake Pacific 3/4OD Compression Fittings
    2x Thermaltake Pacific 30mm Male-to-Female Fittings
    In the near future I plan to change things up a bit & add some additional hardware. An Asus Blu-Ray R/W optical drive, a multi.-card reader, a Thermaltake PR2U Pump/Reservoir (when available in the US), a Tt RL360 radiator for up top, and some additional fans.
     
    The build was straightforward; lots of little screws, but nothing too difficult. I thought the instruction manual was quite handy & easy to follow. I chose not to install the hard drive racks b/c I don't use that many; and I like the look of the big open chassis. I also need to pick up additional cords/controllers for the Lumi's & Riings fans so I can improve on cable management.
     
     

  13. Like
    eqeqeqe reacted to Lew in Pacific RGB G1/4 PETG tube   
    Anyone use this yet,  pics, vids?  id love to see just how well the the tubing carries the light, how bends affect.  This looks awsome but id love to see how it actually works and looks in a system vs the advertising pics and graphics on the site.....
     
     
  14. Like
    eqeqeqe reacted to Daitermib in Portal search Dating for ####   
    Opened the newest site for finding partners for 1 night ... no texting and other evil spirits, go and find a mate on thenight!
    Huge number of profiles boys and girls from anywhere on the planet! This not find any 1 portal.
    http://bit.ly/2kbiro3
  15. Like
    eqeqeqe reacted to Mr_Armageddon in Project Open Core: Liquid P5, Hardline Tubing, Illuminated System Panel   
    Sounds good. Curious to see if the new Thermaltake cables are as good as the one purchased from Amazon.
  16. Like
    eqeqeqe reacted to Larrout in Poseidon Z trouble   
    Hello guys,i'm new one here,and my English is not very good,but i need ur help.My keyboard  starts doubleclicking some keys and not  clicking another ones,sometimes it goes  together.What can i do with this? I dont have check for this one,but it was bought half year ago
  17. Like
    eqeqeqe reacted to HappyBuddhaman in Project 2501 - Update - Audio advice   
    Project 2501 is turning into a dream machine (see specs below), was wondering if anyone has any experience with audioengine A5+ speakers.  Turning into an Audiophile and looking for the best quality I can get (within reason).  I have a Soundblaster ZxR pushing some Corsair SP2500's right now, but looking to eventually upgrade into something better.
     

  18. Like
    eqeqeqe reacted to NJUHOBBY in How to install TT riing 12 RGB fans to my TT Core P3   
    Could anyone please tell me how should I install my TT riing 12 RGB fans to my TT core P3 computer case? I saw the screws coming with the Fans in the package, but totally have no idea where should I put them on the computer case and how. It seems that there's no proper screw holes on the computer case I can use for these beautiful fans. Thanks in advance!
  19. Like
    eqeqeqe reacted to tysontom in What is ERP?   
    ERP stands for Enterprise Resource Planning. For every business we should maintain an ERP solution. That will help us to make everything in a smooth way. Now days every organization started to use the ERP solutions and software for make their business in a better level. This will make their work easier and also save time. We know there are various processes that are essential to running a business. Through an ERP software we can make every steps include in those software. We should start learning about how to manage an ERP solution. For example you were planning to develop an ERP Software for a flower shop. Before start the developments we should get the complete process happens in that flower store. Learn the activities thoroughly and invent this by including order management, accounting, human resources, customer relationship management etc. The ERP solution will integrate all these work in a single system. This leads to save our time and also human work. So we can reduce the risk in our business with gaining profit for our investments. There may mistakes occurs from human being. But if you start using ERP systems everything will goes in a smooth way without any struggles. 
  20. Like
    eqeqeqe reacted to ThermalMike in **ATTN Users with Thermaltake Riser Cables**   
    **ATTN Users with Thermaltake Riser Cables**

    **UPDATED 5/3/2017**

    If you are experiencing issues with your Thermaltake Riser Cable product, please help to contact our support for warranty replacement options.

    Email Contacts:

    USA/Canada/South America:
    support@thermaltakeusa.zendesk.com

    International Global Customers:
    info@thermaltake.com

    Subject: Thermaltake Riser Cable Request

    What we need:
    1. Motherboard Make/Model
    2. GPU Make/Model
    3. Your invoice/receipt
    4. Brief description on the issues you are having
    5. Your shipping address
    6. Your Name
    7. Phone Number (For shipping purposes)

    Once your email has been received, please allow 1-3 business days for processing.
    Due to region availability, some requests may be delayed.
     
  21. Like
    eqeqeqe reacted to noMercy19 in Will an EK Predator 360 fit in the TOP of TT View 31?   
    Title says it all.

    The EK Predator has the pump and reservoir attached to the end of the radiator making the total length 415mm.

    If someone here owns a View 31 and could take a measurement for me, I'd greatly appreciate it. I'm looking to see if the distance from the end 120m mounting hole to the wall of the case is at least 50mm.
  22. Like
    eqeqeqe reacted to Erik Bmods in Project: Green Peace. Thermaltake A71 Chaser LCS feat. TT Bigwater850GT   
    Hey guys. I was asked by thermaltake to do a mod in a case they have had on the market for awhile. The Thermaltake A71 Chaser LCS. They really wanted me to feature the double bay AIO watercooling system that comes with the case. Now me being me I couldn't just do a regular build with the bay res where it normally goes. So doing some custom mods to spruce up the look of the case and AIO. 



    Now this isn't your regular AIO like a corsair h100i or something along those lines. This case comes with a fully custom loop with quick disconnects for easy draining. However I am not the biggest fan of quick disconnects. But that is the beauty of this unit. You can fully customize the loop with hard tubing if you like......which I totally intend to do. But I will still be incorporating the whole entire unit because the disconnects are very handy for easy draining and repair if needed. But I will be hiding them as they are not the prettiest things IMO.



    Now this isn't the first case that  I would choose if were up to me, but I was pleasantly surprised with the full tower. It is for sure marketed more toward the gamer with its aggressive look (which I like a more subdued look in my cases) than a pretty living room PC. The build quality is crazy the side panles are the strongest steel out of any thermaltake chassis I have built in before. - See more at: http://techcity.tv/forum/discussion/comment/1319#Comment_1319
     
    Hope you enjoy!!
    Merry Christmas.
     
    Ezgunna82
     
     
     

     

     

     

     

  23. Like
    eqeqeqe reacted to Snypehunter in Tower 900 Build   
    I have been researching a new system build for several weeks.. I was first enamored with the Core P5; but it has so few storage options, that my P5 will have to wait.
     
    This will be more of an evolution than a complete build.
     
    My Tower 900 is arriving tomorrow.  I have already built a sturdy pedestal/alter for it to live on.  To start with, I plan on simply moving my existing rig into the Tower 900 after a really detailed cleaning with CRC.  The final build will include a complete motherboard/CPU/Memory/GPU upgrade.  I am hoping to use this forum to gather advice from the universe to help me decide how to progress.  This will be my first liquid cooled build; though I have been building and modding PC's since 1988.  This will also be my first showcase PC.  All previous builds were purely utilitarian and recycled parts from the previous build.
     
    The Plan:
            Stage 1 - Case Prep and migration of Old Faithful.
                         1. Obtain Tower from shipper who has held it hostage during the holidays only a few miles from me
                         2. Carefully label and dissect Old Faithful.  C drive is a RAID 0, so a perfect reassembly is essential.
                         3. Carefully clean all parts with compressed air, alcohol and CRC Contact Cleaner (seems recommended by the internet enthusiasts for difficult to clean parts and states it is safe for PC boards).
                         4. Perform appropriate rites to the Computer Gods, sacrifice a chicken, 2 slices of pizza; and complete the rites with a shower of mentos and cola.
                         5. Reassemble.
              Stage 2 - Fans and Lights (early in the build BC cheaper and an easier sell to the wife)
                        STAGE IN PLANNING - OPINIONS NEEDED PLEASE
                        1. Install fans: 7 x 140 for the 2 radiators.  I'll use a smaller radiator for the GPU loop when it goes in)
                        2. 2x140 high-pressure fans in the back and 2x140 high-volume in the top
                        3. 1x140 high-pressure fan for displayed HD cage.
                        4. Install colored LED light
                        5. Install UV lights
                        6. Install light/fan controller
               Stage 3 - CPU Loop - (this may shift if a windfall allows me to upgrade the guts)
                        1. Install CPU radiator. I wanted an EKWB. Which is the largest I can accommodate?
                        2. install pump/res combo (I think it will look better)
                        3. I'd like to install flow monitors and temperature.  Suggestions?  something cool to look at?
                        4. Install EKWB water-block.  Hopefully they make one for this old chip.  This will get replaced when the MB/CPU upgrade happens.
                        5. Install flexible hose and fittings.  This will be replaced with hard tube at the CPU/MB upgrade
                        6. What is the proper ritual?  What do I sacrifice, aside from my credit card?
                        7. Fill, leak test and burp.
     
    What is currently moving over: I7-3930k, Asus P9X79 Deluxe, MSI NVidia 970, 32GB memory, 2SSD (RAID for C:), 1 Blu-ray (I wish I could move both),  and 6 hard drives.
     
    Questions:  I am stuck with Fans and lighting.  So far, I am leaning towards the NZXT Hue+ for fans, and RGB lights.  I cannot get any good suggestions for ambient UV.  I'd like the tubes and such to "glow".  Another concept was to use colored fittings; however, that means, if I ever want to change colors, I need change fittings.
     
    So far, the only things that are set in this build is the case.  Please chime in.  I'd like to hear from you all so I don't have to learn by spending a fortune.
     
    Thanks for the help all!
    Snypehunter
     
     
                      
     
     
  24. Like
    eqeqeqe reacted to Dabeavis in The Fighting Computer - My First PC Build   
    Bit of a minor update, my mouse, speakers and another fan splitter came in.





    I'm sorta getting somewhere now. The Core X9 however is still rather empty inside and will be empty for a while.
     
    Update - Just got my wireless card today.


     
    I should also eventually get another 200mm fan (Perhaps a Tt Luna 20) to replace the stock one I accidentally wrecked when testing how much the front panel affects the fans' airflow. I might also be tempted to get some 140mm fans to replace the 120mm ones (Which I might use in other PCs).
     
    The SSD I ordered seems to be lost in transit so I requested a refund and decided to buy it later since I got a GT 730 for $57 to tide me over a bit until then.
  25. Like
    eqeqeqe reacted to Diesel Powered in Core P3 Build 1080 SLI Hard Tube 99%   
    I Just built this, and I'm building 2 more.   This one scored 12880 on Time Spy.  99% on all Passmark, and Futuremark test.  I have red opaque coolant, for it and of course the acrylic cover.  Just don't want to open the coolant, and remove the protective covering from the acrylic prior to shipping to the buyer.  There are videos on you tube. Here is a link that shows off the RGB's in the dark.
     
    <iframe width="854" height="480" src="https://www.youtube.com/embed/1BQvNYfvx-c"frameborder="0" allowfullscreen></iframe>
     
    <iframe width="854" height="480" src="https://www.youtube.com/embed/WHIkSS9Da_M"frameborder="0" allowfullscreen></iframe>
     
    I know the videos aren't great but they serve the purpose.  Please tell  me what you think of the build though.






×
×
  • Create New...