Search the Community

Good afternoon! Thank you for deleting accounts. Today I re-created my account - eddd2002@gmail.com But the data is not uploaded to the site. I noticed one oddity - in the My uploads tab - in the Activity section - the schedule date is displayed on the next day (2018.10.04), although the date is still on my computer (2018.10.03). Maybe this is the reason not to upload data to the site? Attached a screen screen with this problem.

Greetings to all, On July 8, 2018 I bought a Thermaltake Core V71 Tower in Spain and I arrived in Colombia at the end of August, so a couple of weeks ago I was able to start with the installation and assembly of my computer parts, All the parts of the computer are Thermaltake brand (source, heatsinks, liquid cooling, etc ...) once the assembly was made in the Tower Thermaltake Core V71, there was a problem when performing the ignition and is that the three (3) Fan (heatsinks) of 200mm that brings this Tower located in the Front and top part DOES NOT ROTATE, just turn on the LEDs. In detail I checked all the connections, I made sure everything was connected correctly, later I focused specifically on the MOLEX connector which is connected to a PSU Thermaltake Toughpower RGB 850 W Gold; connecting and disconnecting repeatedly, but the fans did not turn and the result was always the same. Obviously if the Fan (dissipaters) do not rotate the functionality of the FAN LOW and FAN HIGH switches is null, but the Leds of these switches if they turn on when pressing them, I would say that their function is fine, but if the Fan does not rotate, there is no case. I have the three original 200 mm fans connected to the FAN CONTROLLER and the only thing I can think of is that it is defective ... Is there anything I could do wrong? Is it possible to CHANGE THE FAN CONTROLLER due to factory defects? Can it be repaired? Where can you change it in Colombia? Could Thermaltake send it to Colombia where I am currently residing? I think all the connections related to the fan controller are correctly. Does anyone have any ideas or recommendations? Everything else works very well, but I would like the fans to work properly and help maintain a good temperature inside my tower. I appreciate the advice and / or recommendations of everyone. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Saludos a todos, El día 8 de julio de 2018 compre una Torre Thermaltake Core V71 en España y me llegó a finales de agosto a Colombia con lo cual hace un par de semanas pude empezar con la instalación y ensamble de las partes mi computadora, Todas las partes de la computadora son de marca Thermaltake (Fuente, Disipadores, Refrigeración Líquida, etc…) una vez realizado el montaje en la Torre Thermaltake Core V71, se presentó un problema al realizar el encendido y es que los tres (3) Fan (disipadores) de 200mm que trae esta Torre ubicados en la parte Frontal y superior NO GIRAN, solo encienden los Leds. Detalladamente revisé todas las conexiones, me aseguré de que todo estuviera conectado de forma correcta, posterior me centré específicamente en el conector MOLEX el cual está conectado a una PSU Thermaltake Toughpower RGB 850 W Gold; conectando y desconectando en repetidas ocasiones, pero los Fan no giraron y siempre el resultado fue el mismo. Obviamente si no giran los Fan (disipadores) la funcionalidad de los interruptores FAN LOW y FAN HIGH es nula, pero los Leds de estos interruptores si encienden al presionarlos, diría que su función está bien, pero si los Fan no Giran no tiene caso. Tengo los tres ventiladores originales de 200 mm conectados al CONTROLADOR DEL VENTILADOR y lo único que se me ocurre es que esté defectuoso… ¿Hay algo que pude hacer mal? ¿es posible CAMBIAR EL CONTROLADOR DE VENTILADOR por defectos de fabrica? ¿Se puede reparar? ¿Dónde pueden cambiármelo en Colombia? ¿Podría Thermaltake enviarlo a Colombia donde actualmente estoy residiendo? Creo que todas las conexiones relacionadas con el controlador del ventilador están correctamente. ¿Alguien tiene alguna idea o recomendación? Todo lo demás funciona muy bien, pero me gustaría que los Fan funcionen correctamente y ayuden a mantener una buena temperatura al interior de mi Torre. Agradezco los consejos y / o recomendaciones de todos.

2018 Thermaltake CaseMOD Invitational Voting Has Started! Vote for your favorite mod on the poll for your chance to WIN a Floe Riing RGB 240 AIO Cooler, Level 20 GT chassis or a Toughpower DPS G RGB 750W PSU! VOTE DATE: 9/18/2018 ~ 9/24/2018 Please note that all winners from previous giveaways will be announced together along with this giveaway! Below are the mods: Malaysia A hmad Syafiq Hamman Spain Aitor Larrañaga USA Calen Saddler Philippines Michael John Lacerna Germany Monia Reuter France Moulard Mathias India Pramod Hambir Thailand Pakawat Chaiboonma UK Rob De Luce Netherlands Tim Warning China Van Lee

Video of the final version of this casemod I did for the 2018 Thermaltake Casemod Invitational season 1. The theme is the Decepticon race from the Tramsformers world. This is a Decepticon that battled for decades on Cybertron and travelled for years to get to earth to ask for help as the war on Cybertron is not going well for the Decepticons. In times of war the outside of the machine is scarred and no time has been spent on making it a shiny machine with glossy paint. The panels are tough and can be replaced easily after having taken damage. The hardware in the other hand is powerfull and well maintained to be ready for any battle ahead.

we are struggling alot for the final... but hey ... here some small teaser for u guys . :D 2018 Thermaltake CaseMod Invitational (TT Season 1) Sponsors ; AMD Thermaltake Technology Inc ASUS Republic of Gamers G.SKILLPlextor AOC TteSPORTS LUXA2 #casemod #battlestation #asus #thermaltake #hcmod #hammanchronicle #thermaltakecasemod #invitational beforefinal.mp4

<a href="https://www.rsmssbldcresult.in/">RSMSSB LDC Result 2018</a>

I'm working excel and I can confirm as of August 17, 2018, the Left Shift + Left Ctrl + Down Arrow do not work together. This is a standard and pivotal action for Excel!

Hi, This is probably not something new, but I noticed that the TT RGB Plus app window size is very large. I remembered the first time I ran the app (around January 2018) it didn't go outside the screen size. I rarely change my fans settings therefore I haven't paid attention to it before, but today when I opened the app, it was huge and I am unable to resize the window, it just stuck at that large size. Also it does not respond to windows 10 automatic resize when you bumped the app to the edge of the screen to make it fit the screen size. So I had to drag it around to do some settings. Not that it's a big deal or that it effects the setting itself, just thought it would be nice if I can fit the window on my screen so that I can see everything at once. PS: I attached the screenshot of my desktop to show the size of the TT RGB Plus app window size. I spared some tiny spaces on the top and left size of the screen, even then the app window size still goes beyond the right and the bottom border of the screen.

The build is all most completed, I have had a little delay due to me moving house and all my gear is in storage, should have been in the new house on 27/07/20108 but now it will be 10/08/2018. so the last time I posted we can everything white and in place to where I wanted everything, I was not to please with the color of the cables so I redid them. I wanted the green to match the rest of the build so painted the cables green with the airbrush. I think they turned out great. I cut some 3mm perplex to make a cable cover for behind the motherboard, this is not going to be on show but thought it will be a nice touch. The build is almost completed, need to run the hard tube and do a small PSU cover then the build we be completed. Here is a little sneak peak. Thanks for taking the time to check out the build log.

Hi, I have 8 Riing Plus 12 LED RGB Radiator Fan TT Premium Edition - https://www.thermaltake.com.au/Cooler/Case_Fan_/Riing/C_00003056/Riing_Plus_12_RGB_Radiator_Fan_TT_Premium_Edition_5_Fan_Pack_/design.htm - Link for my fan so there can be no confusion. With the new update to the TT RGB PLUS Software V 1.2.0 released on 2018/07/16 I seem be having an issue that is quite irritating. Before anyone says this isn't the correct software which I've been told, this is the software listed on the support page for my product. Firstly now with the new software if it isn't running as a background task the lights on the fan don't work. I never used to have the program open displaying in the taskbar to have the lights working but now if it isn't a background task the lights don't work anymore. I'm guessing this is just a new implementation by Thermaltake which I can live with but is annoying since I didn't need it as a background task before. Secondly now when my PC goes to sleep the lights on my fans stop working. When i wake up my PC the lights continue to stop working and I have to manually close the software from the task tray and reopen it manually for the lights to kick in again. Does this happen to anyone else with the new software? I have tried reinstalling it with no luck and I have no access to previous versions to test them out. I emailed Thermaltake to ask them for access to previous versions and they said they couldn't provide me access to it. If anyone could provide any word on this issue on how to fix or if they are getting it also would be appreciated. Thanks

I saw and heard these mentioned in Computex 2018 videos of Thermaltake's setup. What's the estimated release time of these? Is there an estimated price point?

It's 2018 how is software still so woefully bad? Not even any basic effects layering.

Avast Secureline VPN license File 2017-2018 With Crack is a small program which is used to enable your connection to the web through secure virtual private network servers.

The Prediction Voting Event has Started! All you have to do is comment below on who you think will win this seasons CaseMOD Invitational for your chance to win our NEW Core P5 Ti Edition! Event date: July 6th 2018 ~ August 3rd 2018

Hi guys , My name is Hamman Known as HammanChronicle website www.hammanchronicle.com Project Title : FATAL BLAST Shared : https://linustechtips.com/main/topic/958982-2018-thermaltake-casemod-project-fatal-blast/ Shared : https://forum.lowyat.net/topic/4631077 here my previous mods Battleship Case Mod ( Featured - Aorus Gigabyte ) - YouTube.MP4 This tournament really something for me . I hope i can deliver new impact to mods field . Stay tuned guys!

2018 CaseMOD Invitational Season 1 has started! Post below on who you think will win this season for your chance to win a View 37 RGB Edition and a Floe Riing RGB 360! Event Date: 5/14 ~ 6/8 / 2018 Terms and conditions: Only one entry per account, cheaters and people with multiple IP's will be automatically removed from the contest.

Chennai Super Kings Team 2018 IPL Chennai Super Kings are back for the 2018 Indian Premier League (IPL) after the 2-year suspension. With its entry it has already signed some top Indian Cricket stars and are looking to win the IPL title. The team was founded in the year 2008 and the team’s home ground is M.A. Chidambaram Stadium in Chennai. They have won the IPL title for two times (2010 and 2011) and have maintained the best win percentage among the other teams taking part in this league. The approximate brand value of Chennai Super Kings team was estimated at $67 million as per 2015 statistics. The team has played 8 seasons out of 10 till date, being suspended for 2 years from the IPL for the alleged involvement of their team owner’s in the 2013 IPL spot-fixing and betting case. With Mahendra Singh Dhoni as their captain for the 2018 season, the Chennai Super Kings team 2018 is listed below:

Hello, I’m writing this the 10th of March 2018, and I need help. I bought and received my Poseidon RBG keyboard today and I plugged it in but the software wouldn’t open and was not supported my MAC OS (latest version). I need to know how to change this , I would like to customize my keyboard and I can’t find a way. Please help!

Hi, As promised thermaltake released new keyboard with new software (Thermaltake Premium X1), however software is still outdated and basic in year 2018 with no ability to add multilayer lighting effects same as Razer and Corsair are offering for past few years. Thermaltake please "Make your keyboards great again" with great software like Razer synapse and Corsair Cue.

Hi ! I wanted to know because wel...i have the legendary issue too - - I have just try to connect with a micro usb to USB cable ...And connect it on my USB 3.1 motherbnoar'd and ...the same... Ah by the way ! It may help a lot ! I am on the LAST version on my motherboard ^^ The BIOS F22b (it come out juste the 13 February 2018...see here ! So i am wondering if it's not because of the last BIOS (problem woith the application who does'nt show at all..but it's marked as work/..in background). Thanks you very much for your assistance ! ^^ 8,21 MB 2018/02/13 Asie Chine Amérique Europe Europe(Russie) Update AGESA 1.0.0.0a + SMU 30.67.0 for Raven Ridge CPU performance enhance

Project : SNOW I am back with a new build for 2018, I want to start by saying a big thank you to Thermaltake for supporting this project. I am doing a Ryzen 1600 build paired with a MSI 1070 gaming x8 graphics card. I will be building in the core P3 from thermaltake, this will be fully watercooled. I have set myself a big challenge to think more outside the box for when it comes to where to place the reservoir and radiator. I have also set myself a challenge to make everything white so I will be doing a lot of painting and resleeving and a lot of cables. Here what I will be using, The thermaltake core p3 snow edition, Ryzen 1600, MSI Tomahawk Arctic B350 The thermaltake Pacific W4 Plus CPU water block, Corsair Vengeance RGB 2x8gb 3000Mhz could upgrade this two 32gb, Samsung 960 EVO m.2 250GB this will be used for OS, WD HDD 1TB, Thermaltake Toughpower SFX 600w PSU, MSI GTX 1070 Gaming X8, Thermaltake Pacific RL 360 Thermaltake Pacific P1 Black, Thermaltake Pacific RGB Hard Tube Fittings, Thermaltake C1000 Green and White, Some of the cable and connectors, I am using mdpc sleeving. Thanks for checking out the post if you have any question or suggestion, leave a post and I will get back to you as soon as I can.

A little sneak peak at the gear i will be putting in my next build Green Hexagon Msi gtx 1080ti gaming x Msi x370 gaming carbon pro 32gb g.Skill rgb ram Amd Ryzen 7 1800x M.2 samsung evo 960 1TB M.2 samsung evo 960 500gb a special thanks to my friends at MSI for providing me with an awsome motherboard and an awsome graphic card! and a special thanks to Andy at Thermaltake for providing me with a case and cooling parts for my next modding projekt that will be shown off at Dreamhack summer 2018. i was competing with my previus build Bat cave at Dreamhack winter 2017 open class and won 1 price. i apologize in advance if there are big gaps between my updates on the log, i'm still waiting for parts and loots to do.

Hi Marcel, please help to login again, according to our record we saw you successfully log-in your account on 1/31 2018

Saw this case on the Thermaltake CES 2018 site and was hoping they were going to unvail it at CES but I did not see it. I am super interested in this case and was wondering if anyone as any additional information on it. If anyone has info or pics please post them. Really hope this case comes to market soon.

but these stages of voting will be? - "Week 1 Voting Event (January 18st ~ January 24th 2018) Vote for your favorite modder for your chance to win one of the listed prizes! Week 2 Voting Event (January 25th ~ Febuary 1st 2018) Vote for your favorite modder for your chance to win one of the listed prizes!" http://casemod.thermaltake.com/MFCs2/vote.html