ThermalMike

I did not intend to get involved with a project so soon. But thermaltake has sent me toys. One lvl 20 vt. and a complete RL.
Project in progress
 






Lvl 20 vt








 
 
 
 

Hello Mike ,
I filled up the loop today ------ > all good , no leak and  the ring fans are working .
Please note at the moment my mobo is not connected , I am just usng the 24 pins bridge on the motherboard cable to power up the loop and the fans . 
I have also connected the PR22 reservoir cable into the TT sync controller ----------- > no luck , the resevoir does not illuminate . 
Is this enough to get the reservoir powered up ?  or do I also need the extra power coming from the mobo ? 
 
thanks 
Da

Before you do anything just go over your connections. Make sure power connector is seated all the way. Check usb connection or if you have a microusb cable you can try usning it from the back of your pc to the controller to test.
do the fan look like they are spinning slow or at a decent speed.
Can you post a pic of how you have it hooked up and a pic of the power cable that came with it.
 
  

Yes it will. As long as your fans are Riing plus. 

Hi,
When using the TT SYNC controller, for the fans connected, make sure you have the PWM cable that connects from the controller to an available motherboard PWM header. Then, for any fan curve settings, you just need to set up in the bios.
You should only need 1 cable plugged into the controller to control all the fans. Hope this is the trick, let us know if you need any further assistance.

Hi Christian,
First off, I would highly suggest to take off your personal information from this form including your email and address that I see in your post!
Now for the cable part, who did you contact from Thermaltake for help?
Did you go to a form on our website to fill out?
Did you email us directly? What email did you use?
 
Hard to track down as I am in the USA here, but happy to get your message forwarded over to assist.
 

You apparently fixed this in the latest update. I just loaded your latest (I had been using an older one that did not have the original error.) You have hashed the PW now. Thank you.

The 2.1.5 version works and I see my CPU temp. Thanks very much

MMm You might want to try the latest software as the version you are using is quite old. Your running v1.0.2 the link below is for v2.1.5 its the latest version I could find. Not completely familiar with the non-plus riing fans.
https://www.thermaltakeusa.com/db/support/software/RiingRGBTTPremiumEdition_Setup.zip

Yes, they have been very kind and have helped a lot ... thank you very much for your work I hope you continue with the accompaniment that we do to all of us, we decided to marry the components and parts that thermaltake brings to the market.

hi thanks for the info, I completely understand
I seen your videos in youtube

today I ordered a Thermaltake RGB mouse pad
love your products

That is correct. You will have only a spot for 2 x 120mm on the bottom when all the hdds are in use. 

The sides have a very small gap at the top and bottom that is not really useful .Yes mounting them in that fashion is more meant for radiators as it will serve no benefit for any other use then that. But the bottom of the case is going to be the source of most of your air. 

Here is a pic of the bottom that I snapped when I was doing my build 

 
Here is a pic of the gap on the side using a penny 

 

Hi Mike - I am going to reach out to support.   After a power cycle both hubs were working for about a week and today I just came into one not working again.   It has 5 fans attached - all "frozen" - 2 in mid RGB wave, 1 with 1 LED light and 2 completely off.   Bizarre stuff

Here is my build  The joker! made frome the core x9

Thanks for the support Tack!

Since I did not find any threads/posts for the Core W100, I'm starting one. I'm a happy owner of tt Core W100, with the pedestal Core P100.
Attached is a picture of my built, which is not finished. I'm adding liquid cooling as soon as I receive my new EVGA RTX2080ti.
 

What gpu are you running
 
Have you tried uninstalling it and deleting the tt folder at C:\Users\*your username*\AppData\Roaming\Tt
if you want to save any profiles you have copy the riing plus folder in that directory and replace it after you test the new install
 
as for the standby not to sure about that never really use standby anymore so have not done no testing with it

yes there is 

To make the program start up just on taskbar right click the TT rgb icon on the taskbar tray

you will see a option that says "Run TT RGB Plus Program when Windows starts" 
It has a box next to it click it. 
If the box is solid like below it will open on your desktop at startup

If the box is hollow like below it will start on the taskbar tray.

 
 
 

ahhhh you need to disable the ones that are not in use by clicking the green circle line thing

once you have clicked that the green circle will turn red and be disabled and the software will no longer look for a fan/plus product on that port

Hi,
Next next version of the TT RGB Software should resolve the HDD pings, we are testing beta already on this.
I have seen you be very concerned about this, so look forward to your feedback.
Schedule should be ready by the end of this month. 1.2.3

Got the replacement today. Works out of the box, that's what I like to see. Thanks TT.

The 9 pin cable with the micro usbs on the end should go to your usb header 
 
how ever you only having one header on the motherboard it is most likely in use.
Your best bet will be to get a internal usb hub if that is the case 
here are 2 that are currently on the market
https://www.amazon.com/Thermaltake-Internal-Outputs-External-PS-ACC-IU2H00R-1/dp/B07FLY6NSX
https://www.amazon.com/Nzxt-Internal-Controller-Black-AC-IUSBH-M1/dp/B01IFGFTJ2
personally I have the Nzxt for my riing plus controllers as Thermaltakes hub was not out at the time.

Good Day, Thermaltake and Thermal Mike. Alvin here from Philippines. I just bought a 3 Fan Pack. Ring Plus Fan TT Premium, and i just love your fans . I love how your Software controls each LED on it and its configs and planning to buy Lumi plus soon.
 
I have 1 suggestion, this maybe complex but mybe possible in the future. Since your TT Sync controller is synced to Aura, RGB Fusion , Mystic Light ONLY. I suggest it will be possible to connect together with the RGB Plus Software. Ifigured out some logic on how. The NEW TT Sync controller can add the old controllers way of connecting to the USB header for the RGB Plus Software to communicate, BUT they must not function at the same time. In your software you might have a switch like "ON, OFF" instead read as "Motherboard control or TT Plus Control" and takes effect on restart so that motherboard can detect if it has access to it or not.
 
Thanks, 
 
PS: I love how your software works but. still AURA SYNC is life. and i like how all the RGB items i have to sync together. 

i must have these, mainly because it will save me 100s of dollars buying new RGB RAM